Wednesday, December 23, 2009

Product does good job filtering RV drinking water

I have written many times about water filtration, water quality and sanitizing your RV water system. There are plenty of reasons RVers should be concerned about the water they drink. When you travel in your RV and stop at different destinations on a regular basis you don’t know anything about the quality of the water.  I have always advocated filtering the water in our RV and I am always on the lookout for the best possible method for filtering water.

In October we attended the RVDA convention/Expo in Las Vegas. Every year vendors bring their wares to the convention and introduce these new products to the RV industry. There are always one or two innovative products that catch my eye. This year it was the Metal Trap Ultra Dual filtration system by Hydropure Technologies.

I had the opportunity to talk to Jerry Rademan, president and scientist/chemist behind the product. Jerry has a true passion for clean drinking water and water purification. He explained to me that the Metal Trap Ultra Dual System is the only filter system commercially available that will eliminate or significantly reduce all contaminants in one single system. He said, “The people at Hydro Pure Technologies are dedicated to our families and to our customers. We think there is no other food source that impacts the health aspect of our lives as clean drinking water! It is our goal to provide the best quality water that is available commercially."

Then Jerry challenged me. He said he would send me a Metal Trap Ultra filter system and let me be the judge. What he didn’t know was that my family had recently moved into a new house where the drinking water has a foul odor and taste. And if anybody would know if the filter system works it would be my wife and my 13 year-old son, who constantly talk about the quality of the water in our home.

Shortly after returning from the convention I received two Metal Trap Ultra Dual water filter systems. I installed the larger 14,000 gallon rated system in the house and the 6,000 gallon rated system for the RV. The installation was simple, especially for the RV. The installation in our house required a quick trip to Lowes for some additional plumbing fittings to tie it into the existing water system.

The thing I really like about the Metal Trap Ultra Dual System is that it works for both well water and city water, so it only makes sense that it would be great for RV applications. It filters out metals like iron, manganese, and copper and it also removes hydrogen sulfide which causes the rotten egg smell found in most well-water sources. It also filters out chlorine, chlorinated organic compounds that can be carcinogenic and it removes residual pharmaceuticals, pesticides and herbicides that can find their way into our city drinking water. 

The metal trap Ultra dual system works on chemical oxidation, absorption and ion exchange principals that both remove and trap these metals and other unwanted contaminants. Most other filters work on physically straining the water, which doesn’t remove the contaminants that are dissolved in the water. When the water enters the Metal Trap filter the unwanted contaminants get oxidized and are trapped in the filter body. The activated carbon filters out the foul tasting and potentially harmful chemicals and contaminants. When the water enters the second filter it goes through a one micron sediment filter which filters out viruses, bacteria, fine silt, oxidized metals and un-dissolved calcium particles greater than one micron in size.

The real test came after the system was installed, and it passed with flying colors. No more odors and the water is great tasting too. My wife said that it lived up to Jerry’s claim that water filtered through a Metal Trap Ultra filter system is better than any bottled water and better tasting too.

Learn about Mark Polks extensive of helpful DVDs, books and eBooks at RVbookstore.com

Monday, December 14, 2009

How to estimate propane needed for an RV trip

Have you ever planned an RV trip to a remote area and wondered how long the LP gas in your LP cylinders or LP tank would last? If so, there is a rough way to do it.

First, you'll need to know how much propane is in your RV cylinders or tank when full. Remember an RV propane cylinder or tank is full at 80 percent of its capacity to allow for expansion. Wait until your cylinder or tank is nearly empty and the next time you have it filled ask the attendant how much it holds.

The next step is to multiply your propane container capacity using one of these formulas, (gallons or pounds), to determine the container BTU capacity.

* BTUs per gallon equal 91,502.
* BTUs per pound equal 21,548.

Now, divide your container BTU capacity by the total BTU demand of the LP gas appliances you plan to use. BTU appliance demand can normally be found on the appliance itself, or in the appliance owner’s manual.

This will give you an idea of how long you can expect your LP gas to last.

For example: If your RV propane container holds 14 gallons of LP gas when it’s full, you multiply 14 X 91,502. The result is 1,281,028. Now divide this figure by the total BTU demand of any LP gas appliances you will be using. Let’s say, for the sake of an example, the total BTU demand will be 43,800 BTUs. In this case you would have approximately 29 hours of use before running out of LP gas.

However, keep in mind that the amount of LP gas in the container and varying temperatures will affect these calculations too. This is especially true in cold weather. At temperatures below zero degrees the per hour container BTU capacity will be reduced by 50% or more.

Calculating propane usage can give you a general idea of how long you can use your LP gas fired appliances before needing to find a propane filling station.

Learn about Mark Polks extensive of helpful DVDs, books and eBooks at RVbookstore.com

Thursday, December 10, 2009

How to prevent water damage to your RV

A RVer wrote me the other day with a question: “My neighbor just paid an expensive repair bill for water damage on his RV and I would like to know what I can do to prevent this same thing from happening to me?”

If there is a way for water to get in your RV it will find it. Water leaks on an RV can cause extensive damage and can be costly to repair. To protect your investment and your wallet you need to take the time to REALLY inspect for water leaks. The outside of your RV may look fine but the internal damage caused by water over a period of time can result in the entire roof, floor or wall rotting away without you even knowing it until it’s too late. You should inspect your RV for water leaks twice a year at a minimum, and especially prior to storage if it will be stored outside.

Here are a few things to look for during your routine inspections.

*To stop a leak before it starts thoroughly inspect all roof and body seams. Reseal any seams or sealants that show signs of cracking or separation. Consult your RV dealer for sealants compatible with different types of materials.

*Look for any discoloration, and feel for any soft spots on the ceiling around roof vents, air conditioners, TV antennas, plumbing vents, and any other openings that were cut in the roof. Soft spots are an indication that water damage has already started. Find the source of the leak and have it repaired immediately.

*Look for any discoloration or wrinkles in the wallpaper, and feel for any soft spots on the walls around all windows, doors, slide outs, or any other openings that were cut in the side walls.

*Identify the location of items like the water heater, furnace, outside shower, potable water fill and city water inlet on the outside of the RV and then access those areas from the inside of the RV. Look for any indications of water damage around these openings.

*Open all overhead cabinets and look in the top corner where the walls meet the ceiling for any discoloration and feel for any soft spots. This would indicate a leak at the seam where the sidewall and the roof attach.

*Check in all outside storage compartments for any indications of water leaks or water damage.

*Check for any soft spots on the roof itself especially around the roof seams at the front and rear of the RV. Thoroughly inspect all sealants on the roof around every opening.

Caution: Be extremely careful when working on the roof of your RV, a fall can cause serious injuries, or be fatal. Not all roofs are designed to be walked on. It may be necessary to use 2X4 foot sections of 1/2″ plywood to distribute your weight over the roof rafters.

*Some Class C motor homes are notorious for leaks in the cab over bed area. Look for any signs of discoloration and feel for soft spots. Remove the mattress and feel for water.

*If your RV has fiberglass sidewalls look and feel the outside walls for any signs of delamination. Delamination is caused by water getting between the exterior fiberglass and the sidewall. When this happens the exterior fiberglass separates from the sidewall of the RV. You can stand at the front or rear of the RV and look down the side for any noticeable ripples or what looks like a bubble. You can also press on the sidewalls. If you feel the exterior fiberglass move it is delaminating. Many times delamination starts where an opening was cut in the sidewall of the RV. Have any noticeable damage repaired immediately!

The key to preventing water damage on your RV is to perform these inspections on a routine basis and to discover and repair any leaks while in the early stages. If you don’t feel comfortable performing these inspections have an authorized service center do it for you.

Learn about Mark Polks extensive of helpful DVDs, books and eBooks at RVbookstore.com

Thursday, December 3, 2009

Mark Polk's seven tips for motorhome tire safety

It seems as though I talk about tire safety all of the time. The reason I do is because tires are an important safety topic concerning motorhomes, and are often overlooked.

Just recently I read a newspaper article that summed up just how overlooked tires are, in general. The article stated, “The Rubber Manufacturers Association found that 29 million drivers believe that tires require no regular maintenance.”

Let’s take a look at my top seven tire tips for safer motorhome trips.

1. Two of the biggest problems with motorhomes today are overloading the RV and under inflated tires. With multiple slideout rooms, large holding tank capacities and the ample amount of storage space available on today’s motorhomes it’s easy to see why so many are overloaded. We have a natural tendency to fill every nook and cranny of available storage space on our motorhome.

2. Another problem is out-of-balance loads. You can be within an axle or tire’s load capacity on one end of an axle, and be over capacity on the other axle end. This is a common problem with motorhomes, and many times the cause is poor weight distribution and/or improper loading of the motorhome. When this happens the tire or tires on the end of the axle that is overloaded are subject to tire failure.

The bottom line is overloaded motorhomes and under inflated tires can be extremely dangerous. The only way to make sure your RV is not overloaded is to have it weighed.


3. Weight ratings for motorhomes are established by the manufacturer and are based on the weakest link in the chain. When you exceed a weight rating, you are overloading one or more components on the motorhome and risk wearing out the component prematurely or complete failure of the component. In many cases the tires on your motor coach are the weakest link.

Just like the axles on your motorhome, your tires have load ratings, too. The maximum ratings are molded into the side of the tires. Keep in mind these are maximum ratings. The sidewall of the tire shows the maximum load and the inflation pressure for that load. Never set the inflation pressures below the recommendations you find on the vehicle manufacturer’s placard, and do not exceed the maximum inflation pressure ratings found on the tire’s sidewall.

4. The tires on your motor coach are the most vulnerable component affected by overloading the motorhome. There are numerous reasons for this. First and foremost is when the tires are not inflated properly for the load. Failure to maintain correct tire pressure can result in fast tread wear, uneven wear, poor handling and excessive heat buildup, which can lead to tire failure.

The only way to correctly measure the inflation pressure in your tires is with a quality inflation pressure gauge. Using your boot, a club or a hammer is not accurate, and don’t ever depend on your eyes to check tire inflation. There can be as much as 20 PSI difference between tires that look the same to your eye. Invest in an accurate inflation pressure gauge. Get one with a double, angled foot. This makes it much easier to check the outer tire of a dual set.

5. Check all of your tires on a regular basis and adjust the pressure according to the manufacturer’s recommendation. Never check inflation pressure when the tires are hot, because you will get a higher pressure reading. And if you let out some air, the tires will be under inflated when they are cold.

If you have dual wheels, you’ll want to add extension hoses to the valve stems to make the job of checking tire inflation easier. It can be nearly impossible to check the inner dual without extension hoses. The best extension hoses will have stainless-steel reinforcement and external braiding for long trouble-free life.

6. Ozone in the air and UV rays from the sun shorten the life of your tires. It’s not uncommon to see motorhome tires with low mileage and plenty of tread that are ruined by the damaging effects of ozone and UV rays. Ozone in the air causes tires to dry rot and deteriorate. UV rays from the sun make it happen quicker. This is especially true of the tire’s sidewall. Inspect your tires for damage, such as cracks in the sidewalls. If you notice anything, have the tires inspected by a professional.

Also, keep the tires covered with covers that will block out the sunlight when you’re not using your motorhome. You should also place something like a piece of wood between the ground and the tires. Be sure that whatever you use is larger than the footprint of the tire. No portion of the tire should hang over the edge of the tire block. This can cause internal damage to the tire.

7. Occasionally washing your tires with soap and water is okay, but anything beyond that can actually shorten the life of your tires. Sidewall rubber contains antioxidants and anti-ozones that are designed to work their way to the surface of the rubber to protect it. Washing tires excessively removes these protective compounds and can age tires prematurely. The same is true of most tire dressing designed to make your tires shine.

Tire failure can be extremely dangerous and can cause extensive damage to your motorhome. There are no guarantees, but by practicing good tire maintenance you can feel much safer and secure that the weakest link on your motorhome will do its job while you’re out exploring this wonderful country we live in.

Thursday, August 6, 2009

How to keep a mouse out of your (RV) house

I am by no means an expert on pest and rodent control, but after researching the subject I can offer a few ideas that seem to work for other RVers.

The first and most important step is to try and prevent mice from being able to access you RV. This can be difficult because they can enter the RV through some very small areas. Start by inspecting the underside of your RV for any gaps or holes. Fill these gaps using silicone or expanding foam. A word of caution, if you never used expanding foam before you should experiment with it on something other than your RV first. When it dries it can expand a great deal more than you expect.

Next, open drawers and cabinet doors inside your RV. Look in all of the corners and crevices, especially where plumbing and wiring enter the RV. If you can see any daylight mice can get in. Again, fill these areas with silicone or foam.

Mice also enter through vents like the furnace. You can purchase wire mesh type covers from your RV dealer that can be installed over these vents. Many RVers suggest you spray some type of insect spray (that contains mint oils) around the tires to discourage mice. The only problem with this is you would need to do it every couple days. I don't recommend any type of poison. It can take several days for the poison to work and the mice will usually die somewhere that you can't find them. If this happens you may never get rid of the smell.

Other RVers recommend using mothballs throughout the RV and in storage compartments, if you don't mind the smell of mothballs. The alternative to mothballs is dryer sheets like Bounce. People swear they work and the smell is much more pleasant. If you are close to where your RV is being stored you may want to use conventional mouse traps and check for mice every few days. The only problem with traps is the bait can actually attract mice. Of course you will want to remove any food from the RV that can also attract mice.

Everything you need to know about using your RV you can learn from Mark Polk. Check out his books and DVDs at RVbookstore.com.

Friday, July 24, 2009

RVer wonders why his travel trailer tires keep blowing out

Dear Mark,
We just returned from a trip and experienced two blowouts on our travel trailer within three days of each other. Weights are well within limits and tire pressure is on the money. Tire covers have been used during idle times. Last year I experienced one blowout. All three were in different locations (dual axles).

The common denominator seems to be original factory tires all with a date stamp of mid 2004. The trailer is a 2005. Last year I did 5,000 miles out West with the heat and harsh conditions to go along with it. This year I went to Maine/New Hampshire and experienced just awful road conditions. I am told that regardless of tread depth and a tires' appearance, that trailer tires begin to deteriorate from the inside and it becomes unsafe around the four to five year mark. All the tires seem to be made in China and a C rating is the best I can find for 14" tires. Here are my questions:
1) Is the deterioration thing accurate?
2)Under the conditions stated should I consider myself lucky?

Darn, by the time you find out you have a flat, a lot of damage can be done to the wheel well area.

Mark Says:
Unfortunately when you combine really bad road conditions with older tires you have a recipe for tire blowouts. Hard impacts (like potholes) can even cause blowouts on newer tires. Five to six years is the time to start thinking about replacing tires on RVs, and yes they can do a great deal of damage that can be costly to repair. I've seen it many times.

It is true that tire damage often begins from the inside of the tire and you won't always be aware of it until it fails. You didn't mention the brand of tires on the trailer from the time it was new. It might be possible the manufacturer didn't use the best tires available for the application. When you replace the tires make sure you get trailer tires rated for the loaded weight that will be placed on the axles. Carlisle tires are a common brand used on trailers.

These DVDs will make you a better RVer
Get these popular DVDs and others at RVbookstore.com
Better Business Bureau Guide to Buying an RV
Choosing an RV: A Logical Approach (with Joe & Vicki Kieva)
Do It Yourself RV Care (with the RV Doctor)
Drive Your Motorhome Like a Pro
Guide to Class A Motorhomes
Guide to Class C Motorhomes
Towing Behind Your Motorhome

Saturday, June 20, 2009

Ten things you should never do with an RV

Here are 10 things you should never do with your RV. Some of these are just plain common sense. Some are lessons you learn the hard way. And some. . . well, you just don't do it with an RV!

10: While traveling on the interstate in your RV, floor it to see what your top speed is.

9: Assume you can fit under that two lane road bridge that doesn't have the height posted.

8: Wait until next week to winterize the RV when the current temperature is 15 degrees.

7: Attempt to empty the holding tanks when your sewer hose "almost" reaches the drain outlet.

6: Loan your new RV to your best friend for a week. You may be looking for a new best friend!

5: Back the RV into the campsite hoping there is nothing behind you.

4: Take your 35 foot RV on the scenic mountain parkway where the posted sign reads no RVs over 25 feet allowed. Trust me on this one!

3: Take your brand new RV on a hunting trip with all the guys. Trust me on this one too!

2: Believe the RV salesman who says, "your truck can pull anything on this lot!"

1: While camping in bear country leave your trash bags outside your RV's door!

Tuesday, June 9, 2009

How to prevent premature RV tire failure

Overloading your RV is likely the leading cause of tire failure. Poor weight distribution and using all of the storage space offered on today's recreational vehicles result in tire overloads.

The only way to learn if your RV is too heavy or loaded improperly is to have the it weighed on platform scales while fully loaded. Load it with everything you plan to take on a trip including passengers, cargo, fuel, full fresh water and propane tanks. If you tow something behind the RV take it to the scales, too. It's possible to weigh the RV and not exceed the GVWR, GAWR or GCWR, but still exceed the tire ratings. This is why you must weigh each axle end separately to determine if tire ratings are exceeded and if the loaded weight is properly distributed.

Under inflated tires run a close second to overloading as a leading cause of tire failure. The load rating for a tire is only accurate if the tire is properly inflated. Under inflated tires cause extreme heat build up that leads to tire failure. The appearance of the tire may look normal but the internal damage can cause the tire to fail without warning.

Tires can lose up to two pounds of air pressure per month. If you don't check your tires for three or four months they could be seriously under inflated.

Ideally you should check tire inflation every day you move or drive your RV and adjust if necesssary. If you can't get into the habit of doing it on a daily basis, then at least check all tires weekly at a minimum when you're traveling.

Always check tires when they are cold, before moving the RV. Invest in an accurate inflation pressure gauge. Check all tires and adjust pressure according to the manufacturer's recommendation. Do no exceed the maximum pressure ratings found on the tires sidewall. Never check inflation pressure when the tires are hot: you will get a higher-pressure reading and if you let some air out they will be under inflated when they are cold. If you have dual wheels, add extension hoses to the valve stems to make checking tire pressure easier. A word of caution, if you add extension hoses you must replace the rubber valve stems with all steel valve stems. The added weight of the extension hoses can cause rubber stems to leak air resulting in under inflation.

OZONE IN THE AIR and UV rays from the sun shorten the life of your tires. It is not uncommon to see RV tires with low mileage and plenty of tread ruined by the damaging effects of ozone and UV rays. Ozone causes tires to dry rot and deteriorate. UV rays from the sun make it happen quicker. This is especially true of the tires sidewall. Inspect your tires for cracks in the sidewalls. If you notice any damage have them inspected by a professional. Two ways to protect your tires from these elements are to keep them covered to block out the sunlight when not in use. For long-term storage, remove the tires and store them in a cool dry place away from the sunlight. I also recommend that you place something like a piece of wood between the ground and the tires. Be sure that whatever you use is larger then the footprint of the tire.

The age of your tires is another factor that contributes to tire failure. I learned this the hard way. I bought an early model Jeep CJ7 to tow behind our motorhome. After completely restoring the vehicle we were ready to try it out. The tires appeared in excellent condition. There were no signs of damage from the sun and little tread wear. We towed the Jeep from North Carolina to Florida and from there to Colorado and back to North Carolina with no problems. Shortly after that we towed it to Pennsylvania. A couple hundred miles into the trip a front tire blew out, damaging the inner fender, shock absorber and below the door. I replaced the tire with the spare and within another 100 miles the spare blew out resulting in more damage. After buying a new tire, we took the Jeep to a tire store to have the other tires replaced. The technician explained that the tires were nine years old and even though they looked in good shape they could not handle the stress put on them. He explained that all tires manufactured in the United States have a DOT number. The number on my tires was on the inside sidewalls. The last three or four digits in the number identify how old the tire is. Older tires used three digits. The first two identify the week of the year that the tire was built and the third identifies the year. Newer tires use four digits. So 3202 is the 32nd week of the year, and 02 is the year 2002. If you question the age of your tires, especially on a used RV, and you can't find the DOT number have them inspected by a qualified tire center.

Have you ever neglected rotate your tires and then one day suddenly notice that the front ones are worn out while the rear one look fine? Even out the wear, and extend the life of your tires by having the tires on your vehicle rotated on a regular basis.

Tuesday, May 19, 2009

Dead RV refrigerator "burped" and then works again

Dear Mark,
When our fridge died while at an RV show, we were told it would cost $1,000 to replace it. We travel on a budget (working as we go) and we're going on a big far north four month tour starting in June. A chance conversation with an RVer led us to "burping" the fridge, lying it on its side before bringing it back upright. We were happy campers to see it working again. But I have since been told it may only be a temporary fix. What do you know about this process and have you heard how long it lasts?

Mark says:
Back in the '70s we would burp RV refrigerators frequently. Older RV refrigerators (pre-early '80s) required precise leveling to work properly. If the unit wasn't level the flow of ammonia in the coils would get vapor locked and the refrigerator wouldn't cool. You would remove the refrigerator and (burp it) turn it upside down for 24 hours. Sometimes it worked, sometimes it didn't.

Newer RV refrigerators don't require as precise leveling as older models. If it's within half a bubble on the level it will operate okay. If you experience a problem with a newer model you can usually turn the refrigerator off a couple hours, make sure the RV is level and turn it back on. If a refrigerator is operated out of level (more than half a bubble) for extended periods the coolant can pool (stop moving) and overheat, resulting in the cooling unit failing.

There are some tell-tale signs of a failing cooling unit. If you smell ammonia in or around the refrigerator the cooling unit is bad and will need to be replaced. If the refrigerator makes loud noises during the initial cool down process the cooling unit may be going bad.

If you burped the unit it's possible that it removed an obstruction that was restricting the flow and now it is okay. If it has other symptoms like I mentioned, or was operated out of level, it will probably need to be replaced. I wish I could tell you more, but it's difficult to say what the outcome will be.

DVD: Travel Trailer/Fifth Wheel 101
If you just bought a travel trailer or 5th wheel trailer, you'll need to know how to operate it. The onboard systems -- electrical, water, LP gas and waste -- are often confusing to new owners. This one hour DVD hosted by Mark Polk provides an excellent understanding of how a towable RV's systems work and how to operate them safely. Learn more order.

Thursday, May 14, 2009

Tips on how to care for the roof of your RV

One of the most neglected areas on your RV is the roof. If you don't keep it clean and inspect its seams on a regular basis you could end up with a big repair bill for water damage. Most of today's RVs use some type of rubber or vinyl roofing material. Here are some things you can do to extend the life of your RV roof.

Safety first!
Be extremely careful whenever you work on your RV roof. You can be seriously injured from a fall. To properly clean and inspect your roof for any damage or potential water leaks you need to climb onto it. Some roofs are more structurally sound than others. It may be necessary to use a couple of 2X4 pieces of plywood or particle board to help distribute your weight between the roof rafters. Regardless of its structural integrity, however, you should walk lightly and be careful.

Rubber and vinyl roofing on an RV are both good, but without routine preventive maintenance they will not last as long as they could.

There are different manufacturers of rubber and vinyl roofs. They provide different instructions for cleaning and maintaining their products. What I'll concentrate on here is what applies to most rubber and vinyl roofing material used on RVs.

Rubber and vinyl roofs should be cleaned and inspected several times a year. Depending on where you park or store your RV its roof may need to be cleaned and inspected more often. Regardless of the type of rubber or vinyl roof you have, NEVER use any cleaners or conditioners that contain petroleum solvents, harsh abrasives or citrus ingredients. These cleaners can cause permanent damage to rubber or vinyl surfaces.

Most manufacturers of rubber roofs recommend you use a medium bristle brush and a non-abrasive cleaner. For light cleaning you can use warm water and a mild detergent like Dawn dish washing liquid. For more difficult cleaning, and to condition and protect the roof, use a commercial cleaning product designed specifically for the roofing material of your RV. Check with your RV dealer for sealants that are compatible with your roofing material.

Hard-to-clean areas like stubborn stains caused by leaves, sap, mold or mildew may require a second treatment. Use caution to prevent the cleaners from getting on the sides of the RV. Always rinse the sides, front and back of your RV before and after rinsing the roof to prevent cleaners from streaking or damaging the finish on your RV sidewalls.

Cleaning the roof is only part of maintaining it. Every time you clean it you need to inspect the sealants around all of the openings and the seams. Water will take the path of least resistance and will find even the smallest opening. Thoroughly inspect the roof sealants for potential leaks and reseal any areas of the roof seams and around openings where you suspect a leak.

Routine cleaning, inspecting and sealing your RV roof can add years to the life to the roof and help prevent costly repairs caused by water damage.


Get headline RV news from Twitter
Keep up with the latest in RV news and information at our new RV Travel headline service at Twitter.com. Plus, you'll be the first to get an alert about each new issue of the weekly RVtravel.com newsletter. Go there now.

Thursday, May 7, 2009

How to tow an RV dinghy four-wheels down with a motorhome

I get asked many questions about towing a vehicle behind a motorhome, but perhaps the most common is “How do you know what vehicles can be towed with four-wheels on the ground?” Here are some tips.

You basically have three options when it comes to towing a vehicle behind your motorhome. You can tow the vehicle with all four-wheels up using a car trailer, with two-wheels up using a tow dolly, or with all four-wheels down.

In recent years towing with all four-wheels down, using a tow bar, has become more popular. Some of the reasons are the ease of hitching and unhitching, not having to deal with a trailer and that more automobile manufacturers are building vehicles that can be towed with four-wheels on the ground without modifications.

What Vehicles Can I Tow With Four-Wheels Down?
Some manufacturer approved vehicles can be towed four-wheels down without any modifications to the drive-train or transmission, but many more require some type of modification to tow it with all four-wheels on the ground.

Many vehicles with automatic transmission cannot be towed with all four-wheels down unless it is four-wheel drive, and even then it requires a transfer case that can be shifted into neutral. Front wheel drive vehicles with manual transmissions and most four-wheel drive vehicles with a manual transfer case are among the best choices for towing with all four-wheels down. Even if you have a vehicle that can be towed with all four-wheels down it’s quite possible that it will have towing speed and/or mileage restrictions. So where do we start?

Start by reading your vehicle owner’s manual to determine if the vehicle can be towed without any drive-train modifications. If the vehicle is approved by the manufacturer to be towed with all four-wheels down the owner’s manual will provide specific instructions on the proper procedures. If the manual does not provide specific instructions about towing with all four- wheels down check with the vehicle manufacturer. Your vehicle warranty could be voided from damage caused by towing a vehicle and not following the manufacturer’s guidelines. Do not rely on what a vehicle salesperson tells you. Almost all vehicles approved to be towed with all four- wheels down will include this information in the vehicle owner’s manual.

If you don’t already have a vehicle to tow a good resource to check on what vehicles can be towed with all four-wheels down is the annual “Dinghy Towing Guide” available at RVbookstore.com. Keep in mind that this is only a guide and it is your responsibility to make absolutely sure the vehicle you are considering towing can be towed with all four-wheels down, with no drive-train modifications, before you make a purchase or actually tow the vehicle.

The Dinghy Towing Guide includes manufacturer approved vehicles for towing without modifications that can be towed at speeds of at least 55 MPH and for distances of at least 200 miles without any special procedures. Pay particular attention to any speed or distance restrictions that could ultimately affect your vehicle warranty. Also pay attention to the restrictions and special instructions listed in the footnotes. The guide lists other valuable information like vehicle curb weights, fuel economy and base retail prices. Keep in mind the lighter the vehicle the better it is. It is easy to exceed a motorhomes receiver weight rating and the Gross Combined Weight Rating (GCWR). Note also that some models listed in their four- wheel drive version can be towed without modifications, but their two-wheel drive version of the same model cannot be towed with four-wheels on the ground.

Be sure to follow any special towing instructions or procedures found in the vehicle owner’s manual. You might be required to remove a certain fuse before you tow the vehicle, or to stop towing after so many miles and start the vehicle to allow drive train components to be lubricated. Following any and all special instructions can save you money and protect the vehicle warranty.

There are many reasons why some vehicles are not approved by the manufacturer to be towed with all four-wheels down. It may be that the vehicle will not track or follow the motorhome properly, or maybe a component in the drive-train could be damaged, and sometimes it is because of liability and warranty concerns. Another reason is the expense involved for a manufacturer to test and approve vehicles for towing with all four-wheels down.

The good news is, in many cases where vehicles are not approved by the manufacturer to be towed with all four-wheels down they can still be towed in this method by adding some type of aftermarket accessory. The most common problem is when the engine is not running components in the drive-train that require lubrication are not being lubricated. Towing a vehicle like this can result in thousands of dollars worth of damage, and/or possibly overheat and catch on fire.

There are specialty aftermarket products and modifications available such as drive shaft disconnects and/or transmission lube pumps that can be added so a vehicle is mechanically capable of being towed without damaging the drive-train.

If the vehicle you want to tow falls in the 20 percent that cannot be modified for towing, you still have the option of using a tow dolly or a car trailer. All vehicles can be towed on a car trailer, as long as you don’t exceed weight ratings, and most front wheel drive vehicles can be towed with a tow dolly.

For more in-depth information on towing check out my DVD Towing Behind your Motorhome.

Thursday, April 2, 2009

Why can't a motorhome be backed while towing a dinghy?

Dear Mark,
I have purchased several books and eBooks from RVbookstore.com, but I can’t find the answer to my burning question. In your eBook The Complete Guide to Dinghy Towing you say to never back up a motorhome when pulling a dinghy. My question is: You see many motorhomes pulling boats. If you can’t back up a toad, how do boaters back up to launch their boats? --Jim Walker

Dear Jim,
The reason you can back a boat trailer, but not a dinghy (car or other vehicle), is that the boat trailer doesn't have a set of steering front wheels.

A while back an engineer at Blue Ox experimented backing several towed vehicles. The results weren't good. One person would drive the motorhome and another would attempt to steer the front wheels of the toad. The problem was, in every test, the front wheels would unexpectedly turn drastically to one side making the steering wheel violently spin out of control. If a person has their hands or arm caught in the steering wheel the results could be a broken finger, hand or arm. Even when they attempted to back straight back the wheels would turn, and it was with other manufacturers tow bars too. You should never attempt to back a toad!

Here is how the engineer explained it:
"The reason this happens is not the tow bar but rather the caster angle in the front end of the towed vehicle. Caster is the forward tilt of the steering axis versus vertical. It provides steering stability, steering returnability and cornering ease. In reverse, the caster angle makes the wheels want to turn around the other direction like "casters" on your office chair or shopping cart. We all know they can't turn all the way around on a car, but they will turn off to the side as far as the steering mechanism will let them.

This is virtually undetectable from the driver's seat in the motorhome making this a very scary situation. If you continue to back up, after the wheels have turned, the tires "scrub" or slide sideways causing damage to the tires. Other things caused by this are; severe stress to the steering components, suspension and towing system components."


Get headline RV news from Twitter
Keep up with the latest in RV news and information at our new RV Travel headline service at Twitter.com. Plus, you'll be the first to get an alert about each new issue of the weekly RVtravel.com newsletter. Go there now.

Friday, March 27, 2009

Uneven towing laws, lack of driver knowledge cause accidents

I've always been an advocate for towing safety, whether it's towing a trailer or a vehicle behind a motorhome. One of the most controversial topics I've encountered is whether a vehicle towed behind a motorhome needs a supplemental braking system. I believe that if the state where you live has laws requiring a trailer over a certain weight to have brakes then the laws would also apply to a vehicle towed behind a motorhome. Another argument is that many state towing laws are antiquated and need to be updated. When some of these laws were written people weren't towing vehicles behind motorhomes.

The brakes on a motorhome are designed to stop the weight of that particular vehicle, not additional weight being towed. This additional weight adds a substantial increase to the distance required to stop safely. And, even if the motorhome is capable of stopping the vehicle, the added stress from the force on the tow bar and hitch when the vehicle doesn't have brakes can result in damage to the tow bar or separation from the hitch. Some motorhome chassis warranties are voided if you tow over a certain amount without a supplemental braking system.

I'll go even one step further. I am not a big fan of the federal government regulating things that individual states should control, but when it comes to trailer towing laws I do believe the laws should be the same for every state. Trailers need safety chains, lights, proper hitchwork and if it weighs over a certain amount it needs brakes, period! It makes no sense that a trailer would need brakes in one state but not in another state. Why do we need 50 different sets of guidelines and laws regulating the operation of a trailer?

AFTER ANALYZING A FIVE YEAR HISTORY of data collected through the National Highway Traffic Safety Administrations General Estimates System I discovered that on average there were 68,358 accidents involving passenger vehicles towing trailers per year. The average fatalities from accidents involving trailers are 446 per year. The average numbers of injuries from these accidents are 24,506 per year and the average instances of property damage resulting from these accidents are 43,405 per year. To me, this is unacceptable.

I would guess that most of these trailer related accidents involve small utility trailers, trailers used in construction and other businesses, horse trailers and of course boat and RV trailers, too. The bottom line is there is no excuse for these kinds of statistics. I see unsafe trailers on the road all the time, but the way I see it is in most cases it is a driver's lack of education or understanding of what is involved to safely and properly tow a trailer, regardless its type or size.

I think a good start to educating the consumer would be to standardize the laws and regulations regarding the operation of all trailers and vehicles being towed. It would simplify the process and answer questions that people have like:

1) What is required to be on the trailer i.e., safety chains, lights, break-away switch (with a charged battery)?
2) How much can a trailer/vehicle weigh before it needs brakes?
3) What type of hitchwork do I need?

Half of the battle to safe towing is using the proper equipment. The other half is enforcement. Law enforcement officers need to be trained on what the laws and requirements are for safe trailer towing and then enforce the laws.

There is no reason for over 68,000 accidents and more than 440 deaths a year involving vehicles towing trailers.

That's how I see it, how about you?
Learn how to tow a vehicle behind a motor home in an easy to understand way. RV expert Mark Polk shows you everything you need to know.

Thursday, March 19, 2009

Keeping cool in your RV

Summer will be here soon and for RVers that not only means prime travel season is upon us, but so is the heat. If you ever walked inside an RV sitting in the direct sunlight, on a hot summer day, you know what I mean. Fortunately there are some simple things we can do to make our summer RV camping trips more pleasurable.

•Strategically parking your RV to take advantage of any shade that is available, especially on the side where the refrigerator vent is located. Don’t be afraid to ask for a shady site when you check in at the campground. This will not only help cool the RV down, but your refrigerator and roof A/C will work much more efficiently.

•You can improve your air conditioners efficiency by keeping the A/C filters clean. In most cases you can wash the filters in warm soapy water, rinse thoroughly and allow them to dry before reinstalling. Another option is to clean the filters with a small hand held vacuum cleaner. I recommend you keep a new set of filters on hand in the event the old filters have seen better days.

•Use your patio awning and any window awnings to assist in cooling the RV down. In addition to the awnings use your window blinds or drapes to help keep the sun out and the cooler air in.

•Campground voltage can fluctuate, especially during the summer months when campers are placing a higher demand on campground electricity. You should monitor the voltage coming in to your RV with a digital voltmeter. If voltage drops below 105-volts or goes above 130-volts turn your appliances and electronic equipment off until proper voltage is restored.

Thursday, March 12, 2009

Your RV tires: the weakest link

During my time in the Army I was in charge of some very large maintenance operations. We would go on countless recovery missions to upright vehicles that rolled over, or to tow a sixty-ton M1 tank back to the maintenance facility. We would inspect and re-inspect the riggings, looking for the weakest link, before attempting to recover these vehicles. Since retiring from the military my passion has been with RV’s and once again I realized the importance of the weakest link lesson.

Every weight rating on an RV is based on the weakest link in the system. The tires on your RV are by far the most important and most neglected link in the system. I can’t begin to tell you how many times I’ve heard people say that the tires on their RV were defective, or my tires only had 12,000 miles on them when I had a blowout. In the majority of cases the truth of the matter is that tire maintenance has been neglected. The only thing between your RV and the road surface is your tires and the air that is in them. This is the weakest link.

What are some of the leading causes of premature tire failure?
• Overloading the tires
• Under inflated tires
• Ozone and UV rays
• Age of the tires
• Rotating tires

Tire failure can be extremely dangerous and can cause extensive damage to your RV. There are no guarantees, but by practicing good tire maintenance you can feel much safer and secure that the weakest link on your RV will do its job while you’re out exploring this wonderful country we live in.




Find out about DVDs and eBooks by RV expert Mark Polk
.


Get headline RV news from Twitter
Keep up with the latest in RV news and information at our new RV Travel headline service at Twitter.com. Plus, you'll be the first to get an alert about each new issue of the weekly RVtravel.com newsletter. Go there now.

Friday, March 6, 2009

Neglecting RV batteries is a bad thing

RV coach batteries are one of the most important and neglected components in the RV. The converter in an RV also has a battery charger. Whenever you are plugged in to electricity or the generator is running, the coach batteries are being charged. They are also being charged by the automotive alternator when you are driving the RV or in the case of a towable RV if you had a charge line wired into the light plug. This constant charging can deplete the electrolyte levels in the batteries cells. If a battery is not maintained properly it will fail much sooner than it should. Depending on how often a battery is being charged will determine how often the electrolyte level needs to be checked.

Checking the electrolyte level on a regular basis can save your flooded lead acid batteries. Check the water level monthly and if you leave your RV plugged in with the batteries being charged by the converter battery charger check it bi-monthly. If your converter doesn’t have a three-stage charger the battery is getting a constant charge of 13.5 volts. When the batteries are topped off this voltage is too high for a float charge and it can boil off the electrolyte over time. If you are not familiar with batteries and battery maintenance have them checked by an authorized service center.

BATTERIES CAN BE EXTREMELY DANGEROUS. They emit gases that are explosive and they contain a very corrosive acid. If you do perform your own maintenance certain precautions must be taken. Do not use an open flame or smoke around batteries. Avoid any electrical arcing or sparks around the battery(s). Wear protective clothing and safety glasses and avoid getting any battery acid on your skin or clothes. If you do come in contact with battery acid flush the exposed area immediately with a lot of cold water.

When you add water only use mineral free water. Distilled water is best, and only fill the cell to 1/8 inch below the fill well. Overfilling cells will cause battery acid to overflow. When this happens the battery will lose some of its capacity and corrosion will build up on and around the battery. Water should only be added after fully charging the battery unless the water level is already below the plates.

Follow these steps for watering the battery. Remove the vent caps and look inside the fill wells. Check the electrolyte levels. The minimum level required for charging the battery is at the top of the plates. If it's below the plates add enough distilled water to cover the plates before you charge the battery. Fully charge the battery before adding more water. When the battery is charged remove the vent caps and check the electrolyte levels. Add distilled water until electrolyte level is 1/8 inch below the fill well. Replace and tighten all vent caps.

GET THE LATEST RV HEADLINE NEWS AT TWITTER

Friday, February 27, 2009

Exercise your RV generator. It's important

When I worked at a RV dealership, every spring our service department was booked with appointments for generators that either wouldn't start, or if they did start they had that all too familiar surging sound. This was a result of letting the generator sit for periods of time without starting and exercising it. Lack of use is one of the biggest problems with generators.

If you have a generator, remember to exercise it on a monthly basis. In gasoline generators the fuel breaks down and gums up causing hard starting and surging problems. This can happen in as short a period of time as one month.

Always keep in mind when you use a generator there is carbon monoxide. You should always inspect the exhaust system on the generator set before using it. Do not operate a generator with a damaged exhaust system.

I once thought that I could avoid exercising the generator by adding a fuel preservative to the fuel tank and then running the generator long enough to get the preservative through the generator set. You definitely should use a fuel preservative whenever the unit will be in storage, but there are many other reasons to start and exercise the generator on a regular basis. Moisture build up can cause damage to your generator. When you exercise your generator it heats up the generator windings and eliminates this moisture build up. This monthly exercise regime also lubricates all of the engine seals and components and helps to prevent carbon build up.

SO WHAT DOES EXERCISING YOUR GENERATOR MEAN? For a gasoline generator it means that you start and run the generator with at least a 50 percent load for at least two hours each month. It is extremely important that you run it with this minimum rated load. Generators are designed to run with a load placed on them. Our motorhome has a 4,000 watt generator so I can either turn the roof air conditioner on in the summer time, which is about 2,000 watts or I can use a couple of small portable electric heaters if it's cold out. It's always better to let your generator run for longer periods than it is for short periods. Check your generator owner's manual for load ratings specific to your unit.

The bottom line is don't hesitate to use your generator and when you do use it put a load on it. A little exercise and preventive maintenance will keep you generator in top operating condition and provide many years of faithful service.

Thursday, February 12, 2009

Be careful when determining tow capacity of a vehicle

When you are determining the tow capacity of a vehicle make sure you know what the rear axle ratio is. It's possible to have the same type and size of vehicle with the same engine, yet the tow ratings may vary by several thousand pounds.

The axle ratio is a comparison of how many times the drive shaft rotates versus the rear wheels. A 4.10:1 axle ratio means the drive shaft or pinion gear rotates 4.1 times for each rotation of the rear axle or ring gear. The higher the numeric value the better the vehicle will tow. Some people have a misperception that a vehicle with four-wheel drive will have a higher tow rating than an identical vehicle that is two-wheel drive. In reality the two-wheel drive vehicle will have the higher tow rating. The reason for this is the transfer case in the four-wheel drive vehicle adds additional weight to the vehicle, usually close to 500 pounds, which lowers the tow rating by that same amount.

Keep in mind that any weight you add to the tow vehicle takes that same amount of weight away from the vehicles tow rating and Gross Combined Weight Rating.

Wednesday, February 4, 2009

How to clean your RV's fresh water tank

The water system in your RV provides water to drink, wash dishes and take a shower. Do not assume it will stay safe and fresh like the water system in your home. Contaminated water is extremely dangerous. We not only have to deal with a water system that hasn’t been used for some time, but when we travel in the RV we hook our water system up to a different water source every time we stop for the night. We hook up to city water, well water, and eventually contaminated water. You’ve probably heard people caution to not drink the water in Mexico. Well that can be true anywhere. We stopped at a campground one night to get a few hours of sleep and I didn’t bother to use the water filter. The water coming out of the faucet was cloudy and had small particles suspended in it.

Possibly the most important step you can take is to keep the fresh water system sanitized. At a minimum you should sanitize the system every spring when you take the RV out of storage and any time you notice stale water or an odor. It’s really quite simple to do.

Start by draining the water heater. Go to the outside compartment where the water heater is located. The drain plug is located in the bottom left hand corner. Remove the plug and open the pressure relief valve on top of the water heater to assist in draining. CAUTION: NEVER drain the water heater when it’s hot or under pressure.

Next you need to locate the low point water line drains. There will be one for the hot and one for the cold water lines. This is the lowest point in the water system. Open these and let the water drain out.

Now, find the drain for the fresh water holding tank and drain all of the water from it. At this point you can turn the water pump on for a moment to force out any remaining water. Do not let the pump continue to run once the water stops draining. Close all of the drains. At this point, we have removed most water from the system.

Now take a quarter cup of household bleach for every 15 gallons of water that your fresh water tank holds. Mix the bleach with water into a one-gallon container and pour it into the fresh water holding tank.

FILL THE FRESH WATER TANK almost completely full. Turn the water pump on, open all hot and cold faucets and run the water until you smell the bleach at each faucet. Close the faucets. If possible, drive the RV or pull the trailer so the water can move around to assist in cleaning the entire tank. Let it sit for at least 12 hours. Drain the entire system again and re-fill the fresh water tank with potable water.

Open all of the faucets and run the water until you no longer smell any bleach. It may be necessary to repeat this process again to eliminate all signs of bleach from the water system. Once this is done it is safe to use your water system.

If you follow these simple steps you can rest assured that the fresh water system in your RV truly is fresh.

Thursday, January 8, 2009

Carbon monoxide poisoning in RV is deadly possibility

The onboard generator makes your RV fully self-contained. It allows you access to 120- volts when there is no shore power available, but keep in mind that carbon monoxide is deadly! You should always inspect the exhaust system on the generator set before using it.

Do not operate a generator with a damaged exhaust system. Make sure the exhaust is directed away from the camping area if you're using a portable generator.

Observe campground etiquette. Do not run your generator after quiet hours.

Never run your generator when you are sleeping! Even with a carbon monoxide detector you cannot see, taste or smell carbon monoxide. Test the carbon monoxide detector every time you use the RV. Know what the symptoms of carbon monoxide poisoning are:

1) Dizziness
2) Vomiting
3) Nausea
4) Muscular twitching
5) Intense headache
6) Throbbing in the temples
7) Weakness and sleepiness
8) Inability to think coherently

If you or anyone else experiences any of these symptoms get to fresh air immediately. If the symptoms persist seek medical attention. Shut the generator down and do not operate it until it has been inspected and repaired by a professional.

Plan all of your RV trips, travel safe and smart and enjoy your RV experiences.

Learn more about using your RV and its operation with Mark Polk's best-selling DVDs, books and eBooks.

Why to put wood under RV tires during storage

It's a good idea to get the weight off of tires when an RV will be in storage for a period of time. But, this is not always practical or even possible. If the weight can't be removed, at a minimum you should try to move the RV every three months to prevent tire flat spots and ozone cracking at the tire sidewall flex point. Flat spots will usually disappear after the tires warm up and travel for a distance, unless the vehicle hasn't been moved for six months or more.

There are actually several reasons for blocking tires. The first step is to make sure the RV is as level as possible so more weight isn't on one tire than the others. The perfect scenario would be to store the RV and its tires in a cool dry, covered area, but as we all know this is not always possible either.

STORAGE SURFACE AREAS can cause your tires to age prematurely. You don't want to leave the tires in contact to any heat producing material or petroleum based material like asphalt. You also don't want them exposed to constant cold or moisture, like sitting on the frozen ground. The wood acts as a barrier between the tires and the ground surface they are being stored on. The proper storage steps would be to clean the tires, cover them to protect them from harmful sunlight and UV rays and inflate them to the pressure indicated on the sidewall of the tires.

It is extremely important that the blocking you use is wider than the tires tread and longer than the tires overall footprint. If not the steel cables in the tires sidewall can be damaged which can also result in premature tire failure.

Also, you can use Lynx Levelers, just make sure you follow the directions above.

Learn more about using your RV and its operation with Mark Polk's best-selling DVDs, books and eBooks.