Tuesday, May 19, 2009

Dead RV refrigerator "burped" and then works again

Dear Mark,
When our fridge died while at an RV show, we were told it would cost $1,000 to replace it. We travel on a budget (working as we go) and we're going on a big far north four month tour starting in June. A chance conversation with an RVer led us to "burping" the fridge, lying it on its side before bringing it back upright. We were happy campers to see it working again. But I have since been told it may only be a temporary fix. What do you know about this process and have you heard how long it lasts?

Mark says:
Back in the '70s we would burp RV refrigerators frequently. Older RV refrigerators (pre-early '80s) required precise leveling to work properly. If the unit wasn't level the flow of ammonia in the coils would get vapor locked and the refrigerator wouldn't cool. You would remove the refrigerator and (burp it) turn it upside down for 24 hours. Sometimes it worked, sometimes it didn't.

Newer RV refrigerators don't require as precise leveling as older models. If it's within half a bubble on the level it will operate okay. If you experience a problem with a newer model you can usually turn the refrigerator off a couple hours, make sure the RV is level and turn it back on. If a refrigerator is operated out of level (more than half a bubble) for extended periods the coolant can pool (stop moving) and overheat, resulting in the cooling unit failing.

There are some tell-tale signs of a failing cooling unit. If you smell ammonia in or around the refrigerator the cooling unit is bad and will need to be replaced. If the refrigerator makes loud noises during the initial cool down process the cooling unit may be going bad.

If you burped the unit it's possible that it removed an obstruction that was restricting the flow and now it is okay. If it has other symptoms like I mentioned, or was operated out of level, it will probably need to be replaced. I wish I could tell you more, but it's difficult to say what the outcome will be.

DVD: Travel Trailer/Fifth Wheel 101
If you just bought a travel trailer or 5th wheel trailer, you'll need to know how to operate it. The onboard systems -- electrical, water, LP gas and waste -- are often confusing to new owners. This one hour DVD hosted by Mark Polk provides an excellent understanding of how a towable RV's systems work and how to operate them safely. Learn more order.

Thursday, May 14, 2009

Tips on how to care for the roof of your RV

One of the most neglected areas on your RV is the roof. If you don't keep it clean and inspect its seams on a regular basis you could end up with a big repair bill for water damage. Most of today's RVs use some type of rubber or vinyl roofing material. Here are some things you can do to extend the life of your RV roof.

Safety first!
Be extremely careful whenever you work on your RV roof. You can be seriously injured from a fall. To properly clean and inspect your roof for any damage or potential water leaks you need to climb onto it. Some roofs are more structurally sound than others. It may be necessary to use a couple of 2X4 pieces of plywood or particle board to help distribute your weight between the roof rafters. Regardless of its structural integrity, however, you should walk lightly and be careful.

Rubber and vinyl roofing on an RV are both good, but without routine preventive maintenance they will not last as long as they could.

There are different manufacturers of rubber and vinyl roofs. They provide different instructions for cleaning and maintaining their products. What I'll concentrate on here is what applies to most rubber and vinyl roofing material used on RVs.

Rubber and vinyl roofs should be cleaned and inspected several times a year. Depending on where you park or store your RV its roof may need to be cleaned and inspected more often. Regardless of the type of rubber or vinyl roof you have, NEVER use any cleaners or conditioners that contain petroleum solvents, harsh abrasives or citrus ingredients. These cleaners can cause permanent damage to rubber or vinyl surfaces.

Most manufacturers of rubber roofs recommend you use a medium bristle brush and a non-abrasive cleaner. For light cleaning you can use warm water and a mild detergent like Dawn dish washing liquid. For more difficult cleaning, and to condition and protect the roof, use a commercial cleaning product designed specifically for the roofing material of your RV. Check with your RV dealer for sealants that are compatible with your roofing material.

Hard-to-clean areas like stubborn stains caused by leaves, sap, mold or mildew may require a second treatment. Use caution to prevent the cleaners from getting on the sides of the RV. Always rinse the sides, front and back of your RV before and after rinsing the roof to prevent cleaners from streaking or damaging the finish on your RV sidewalls.

Cleaning the roof is only part of maintaining it. Every time you clean it you need to inspect the sealants around all of the openings and the seams. Water will take the path of least resistance and will find even the smallest opening. Thoroughly inspect the roof sealants for potential leaks and reseal any areas of the roof seams and around openings where you suspect a leak.

Routine cleaning, inspecting and sealing your RV roof can add years to the life to the roof and help prevent costly repairs caused by water damage.


Get headline RV news from Twitter
Keep up with the latest in RV news and information at our new RV Travel headline service at Twitter.com. Plus, you'll be the first to get an alert about each new issue of the weekly RVtravel.com newsletter. Go there now.

Thursday, May 7, 2009

How to tow an RV dinghy four-wheels down with a motorhome

I get asked many questions about towing a vehicle behind a motorhome, but perhaps the most common is “How do you know what vehicles can be towed with four-wheels on the ground?” Here are some tips.

You basically have three options when it comes to towing a vehicle behind your motorhome. You can tow the vehicle with all four-wheels up using a car trailer, with two-wheels up using a tow dolly, or with all four-wheels down.

In recent years towing with all four-wheels down, using a tow bar, has become more popular. Some of the reasons are the ease of hitching and unhitching, not having to deal with a trailer and that more automobile manufacturers are building vehicles that can be towed with four-wheels on the ground without modifications.

What Vehicles Can I Tow With Four-Wheels Down?
Some manufacturer approved vehicles can be towed four-wheels down without any modifications to the drive-train or transmission, but many more require some type of modification to tow it with all four-wheels on the ground.

Many vehicles with automatic transmission cannot be towed with all four-wheels down unless it is four-wheel drive, and even then it requires a transfer case that can be shifted into neutral. Front wheel drive vehicles with manual transmissions and most four-wheel drive vehicles with a manual transfer case are among the best choices for towing with all four-wheels down. Even if you have a vehicle that can be towed with all four-wheels down it’s quite possible that it will have towing speed and/or mileage restrictions. So where do we start?

Start by reading your vehicle owner’s manual to determine if the vehicle can be towed without any drive-train modifications. If the vehicle is approved by the manufacturer to be towed with all four-wheels down the owner’s manual will provide specific instructions on the proper procedures. If the manual does not provide specific instructions about towing with all four- wheels down check with the vehicle manufacturer. Your vehicle warranty could be voided from damage caused by towing a vehicle and not following the manufacturer’s guidelines. Do not rely on what a vehicle salesperson tells you. Almost all vehicles approved to be towed with all four- wheels down will include this information in the vehicle owner’s manual.

If you don’t already have a vehicle to tow a good resource to check on what vehicles can be towed with all four-wheels down is the annual “Dinghy Towing Guide” available at RVbookstore.com. Keep in mind that this is only a guide and it is your responsibility to make absolutely sure the vehicle you are considering towing can be towed with all four-wheels down, with no drive-train modifications, before you make a purchase or actually tow the vehicle.

The Dinghy Towing Guide includes manufacturer approved vehicles for towing without modifications that can be towed at speeds of at least 55 MPH and for distances of at least 200 miles without any special procedures. Pay particular attention to any speed or distance restrictions that could ultimately affect your vehicle warranty. Also pay attention to the restrictions and special instructions listed in the footnotes. The guide lists other valuable information like vehicle curb weights, fuel economy and base retail prices. Keep in mind the lighter the vehicle the better it is. It is easy to exceed a motorhomes receiver weight rating and the Gross Combined Weight Rating (GCWR). Note also that some models listed in their four- wheel drive version can be towed without modifications, but their two-wheel drive version of the same model cannot be towed with four-wheels on the ground.

Be sure to follow any special towing instructions or procedures found in the vehicle owner’s manual. You might be required to remove a certain fuse before you tow the vehicle, or to stop towing after so many miles and start the vehicle to allow drive train components to be lubricated. Following any and all special instructions can save you money and protect the vehicle warranty.

There are many reasons why some vehicles are not approved by the manufacturer to be towed with all four-wheels down. It may be that the vehicle will not track or follow the motorhome properly, or maybe a component in the drive-train could be damaged, and sometimes it is because of liability and warranty concerns. Another reason is the expense involved for a manufacturer to test and approve vehicles for towing with all four-wheels down.

The good news is, in many cases where vehicles are not approved by the manufacturer to be towed with all four-wheels down they can still be towed in this method by adding some type of aftermarket accessory. The most common problem is when the engine is not running components in the drive-train that require lubrication are not being lubricated. Towing a vehicle like this can result in thousands of dollars worth of damage, and/or possibly overheat and catch on fire.

There are specialty aftermarket products and modifications available such as drive shaft disconnects and/or transmission lube pumps that can be added so a vehicle is mechanically capable of being towed without damaging the drive-train.

If the vehicle you want to tow falls in the 20 percent that cannot be modified for towing, you still have the option of using a tow dolly or a car trailer. All vehicles can be towed on a car trailer, as long as you don’t exceed weight ratings, and most front wheel drive vehicles can be towed with a tow dolly.

For more in-depth information on towing check out my DVD Towing Behind your Motorhome.