Thursday, January 12, 2012

Are tire pressure gauges accurate? Not always

We often talk about the importance of checking the inflation pressure in tires, but is your tire pressure gauge giving you accurate information? I receive several emails regarding the accuracy of tire pressure gauges.

One person wrote, “I understand that tire pressure in an RV is crucial and can cause serious problems if not inflated correctly. Well, the problem is this, how do you know if the tire gauge is accurate? I have seen two tire gauges show as much as 16 psi difference on the same tire. Is there a recommendation as to which tire gauges are the most accurate?”

What’s funny about this is for many years, as a Maintenance Warrant Officer in the Army, I was responsible for tool calibration programs. Certain tools required regular calibration to ensure accuracy. I use a quality tire pressure gauge, but after reading this question realized that after several years of using this gauge I have never had it checked for accuracy.

Many of the really inexpensive gauges ($5) you can purchase can’t be calibrated, and if the reading is inaccurate the gauge is worthless. This is why you should spend a little more ($15-$25) and get a quality pressure gauge that can be calibrated. I am a real believer in the old saying; you get what you pay for.

If you have any doubt about the accuracy of your tire pressure gauge there are a couple things you can do to check it.

1) You can check the air pressure in a tire with the gauge in question and then check the same tire with another gauge. If there is a significant difference in the readings (4 or more psi) between the two gauges one or both gauges may be inaccurate. If both gauges read within 1 to 2 psi of each other the gauges are more than likely accurate.

2) If you want a more precise method for checking the accuracy take the gauge to a local tire dealer or fleet truck maintenance facility and ask them to check it using a master gauge. A master gauge is a gauge that is certified to be accurate. But I caution you there are lots of tire dealers who don’t have their own tire pressure gauges calibrated.

Note: Don’t depend on pressure gauges at gas stations to be accurate. These are usually abused and neglected, raising concern over accuracy.

There are several different types of pressure gauges available on the market. One important thing to keep in mind is the pressure the gauge is rated for. Most automobile tires are inflated to around 32 psi, so a 0 to 60 psi gauge is sufficient. On the other hand some motorhome tires are inflated to 100 or more psi. It is important, for accuracy and to prevent damage to the gauge, that you get the right gauge for the job. A general rule of thumb is to find a gauge that can read double what the inflation pressure is set at. This isn’t always possible especially with tires inflated to 100 psi, so find a gauge rated for high pressure, like 160 psi.

Possibly the most common type of pressure gauge is the plunge or pencil type. Some of these are calibrated and some of the cheaper ones are not. As a general rule a common plunge type gauge you would purchase will be accurate to + or – 3 psi when it is new. The accuracy of these type gauges are also affected by temperature, humidity and altitude.

Note: Always check the tire pressure when the tires are cold, before traveling. If you check the tires when they are hot you will get a false (higher) reading and if you let air out of the tires they can be seriously underinflated when they are cold.

Like everything else these days’ things are switching from analog to digital. Analog tire pressure gauges were the standard for many years, but advancements in digital technology have improved on that standard. Analog dial gauges are about as accurate as the quality pencil type gauges. In numerous tests comparing different type gauges digital gauges were the most accurate tested.

Regardless of the type of gauge you choose there are high quality and low quality gauges available. Buying a cheap digital gauge would be the same as buying a cheap pencil type gauge. Here are a few things to keep in mind when it comes to tire pressure gauges.

1) Spend a few more dollars and get a quality pressure gauge.

2) If the gauge will be used for checking dual wheels on a motorhome the chuck end of the gauge should have a dual foot design to make the job much easier.

3) Always select a gauge rated higher than the inflation pressure of the tires you are checking. Applying more pressure than the gauge is rated for can damage the gauge and affect the accuracy. If you over-pressure a gauge have it tested for accuracy.

4) Try not to drop or jar the gauge. Store the gauge in some type of protective covering or case and in an area where it won’t be hit or damaged.

5) Periodically have the gauge tested for accuracy. At a minimum compare it to another quality gauge to see if both read the same, or close to the same pressure.

6) Most importantly, once you purchase a quality pressure gauge use it on a regular basis to check your RV and automobile tires.

Remember, properly inflated tires are safer, extend the life of the tires, improve fuel efficiency and lessen the chance of unexpected and premature tire failure.

Happy RV Learning,

Sunday, January 1, 2012

Bottom Line - Why Weigh your RV?

Weighing your RV can be the difference between a safe, enjoyable trip and a costly, disastrous trip. With multiple slide out rooms, amenities like washers and dryers, large holding tank capacities and the ample amount of storage space available on today’s RVs it’s easy to see why so many are overloaded. Overloaded RVs are extremely dangerous. Actually there are a lot more reasons for weighing your RV than I listed here, but my intent was to highlight some of the most important reasons for weighing your RV.

Note: When talking about weights and weighing RV’s there are some differences between motorized and towable RV’’s. This article is generic in nature and some terms and definitions for certain type RV’s are excluded. My goal with this article is to discuss weight issues that commonly apply to both categories of RV’s.

First and formost safety is the number one reason to weigh your RV. Driving or towing an overloaded RV is a leading cause for RV accidents. Overloading your RV puts you, your passengers and other people in harm’s way.

Overloading RV’s is tough on the tires. The tires on your RV are the most vulnerable component affected by overloading the RV. There are numerous reasons for this. One reason is when the tires are not inflated properly for the load. Failure to maintain correct tire pressure can result in fast tread wear, uneven wear, poor handling, and excessive heat buildup, which can lead to tire failure. Another problem is, when you weigh your RV the total weight of the axles may be within the axles weight rating but it may be overloaded on one side of the axle or the other. For the sake of an example, let’s say you have an axle that is rated for 6,000 pounds. When we weigh the RV, the weight on that particular axle is 5,950 pounds. We are within the weight rating for the axle itself, but when we weigh each axle end separately we discover that one end weighs 3,400 pounds and the other end weighs 2550 pounds. We are still within the 6,000- pound axle weight rating, but the tires are rated for 3,000 lbs. at a specified psi. This means the axle end that weighs 3,400 pounds is overloading the tire by 400 pounds, even if the inflation pressure is correct. Eventually the overloaded tire will fail.

Overloaded RV’s can result in suspension system and brake related problems. Overloading can lead to rapid vehicle suspension system wear, or component failure to include: springs, shock absorbers, brakes and tires. Overloading the RV increases the stopping distance and if serious overload conditions exist for extended time periods the brakes can fail completely.

There is a reason RV’s have weight ratings. The suspension system, tires, wheels, brakes, axles, and the RV itself all have weight ratings. Weight ratings are established by the manufacturer, and are based on the weakest link in the chain. When you exceed a weight rating you are overloading one or more of the components on the RV and risk wearing the component out prematurely or complete failure of the component.

1) The Gross Vehicle Weight Rating (GVWR) is one of the most crucial safety factors for your RV. The GVWR is the maximum allowable weight of the vehicle when fully loaded for travel including, all passengers, all cargo, fluids and fuel. The GVWR is equal to or greater than the sum of the unloaded vehicle weight (UVW) plus the net carrying capacity (NCC) for the RV.

2) The Gross Axle Weight Rating (GAWR) is the maximum allowable weight that can be loaded on each axle of the RV. The GAWR is based on the lowest weight rating of other components in the system, like suspension components, brakes, wheels, and tires.

3) The Gross Combined Weight Rating (GCWR) is the maximum allowable combined weight of the fully loaded vehicle and the fully loaded vehicle/trailer being towed. It is dangerous to exceed any weight rating, and the only way to know is to have the RV weighed.

Note: There are many other weight ratings for motorized and towable RV’s. Never exceed any weight rating.

Poor Weight Distribution is a common problem with RVs. When weight is not properly distributed and/or the RV is loaded improperly the tire(s) and other components on the end of the axle that is overloaded are subject to failure. When a tire fails many RVers contribute it to a defect in the tire, but with overload conditions that is seldom the case. The only way to avoid this is to weigh each axle end separately to determine if a tire overload condition exists. If any overload condition exists it must be resolved immediately. In some cases it might be possible to redistribute the weight and then weigh it again. If the overload condition still exists you will need to remove some of the weight from the RV.

Overloading can result in untimely breakdowns and costly repairs. When an overload condition exists components on the RV can wear out prematurely. Transmissions overheat, brakes wear out, tires fail and the end result can be an unexpected and sometimes dangerous breakdown. These situations can often times be avoided by knowing and managing the weights in and on your RV.

Overloading your RV is unsafe! That’s the bottom line.

That’s some pretty convincing reasons for weighing your RV, but just how do you go about it? The actual process of weighing your RV is not that difficult. It may take a little time at the scales, but it is well worth it knowing that you are traveling safely within all weight ratings.

The first step is to find scales where you can weigh your RV. This shouldn’t be a problem; you can look in the Yellow Pages under moving and storage companies, gravel pits and commercial truck stops. There are several different kinds of scales. What is important is to find scales where you can weigh individual wheel positions in addition to the overall weight, and the axle weights. Remember we said earlier it is quite possible to weigh an axle and be within the Gross Axle Weight Rating, but you can exceed the tire rating on one axle end or the other. Call the number where the scales are located and ask them if it is possible to weigh your RV in these configurations.

The next step is to weigh everything! The day you head to the scales have the RV fully loaded for travel. If you tow a vehicle or trailer behind the motorhome take the loaded vehicle with you. If it’s a tow vehicle and trailer have it loaded as if you were leaving on a camping trip. Be sure to include all passengers, cargo, food, clothing, fuel, water, and propane.

I am including a link to a brochure that you can download, print and take with you to the scales. It will walk you through the proper procedures for weighing your RV.
 http://www.trucktires.com/bridgestone/us_eng/press/zip/WeighForm.pdf

Always keep in mind that weights (over time) can and do change according to how you load and distribute the weight in your RV and on many other factors. You should get in the practice of weighing your RV periodically to stay within all weight ratings. Whenever an overload condition exists resolve the problem before using your RV.

Happy RV Learning,

Mark Polk
RV Education 101

Monday, December 26, 2011

Be Prepared for Bad Weather While RVing


Something many RVers do not take into consideration with the freedom to roam is the weather conditions where you are traveling to, or spending the night. RV's are great, but they are not safe in severe weather, like lightning and thunderstorms with high winds, tornadoes and hurricanes.


Every RVer should own a weather radio receiver. Prices for receivers can range anywhere from $25 to $200 depending on the quality of the receiver and the features it has to offer. We actually have two weather radio receivers. Both are from The Weather Channel® Stormtracker™ series by Vector. We leave the Compact Storm Tracker in the RV at all times. It’s a TV with a five inch screen, an AM-FM radio, emergency weather radio, cell phone charger and flashlight all in one. When we arrive at our destination we set it in the ‘Weather’ position and tune in to the NOAA station with the strongest signal in that area. Then, by leaving the Storm Tracker in the alert/lock mode 24/7, when an all-hazard emergency or weather alert is broadcast by NOAA, the Storm Tracker sounds an audible alert to notify us that a message is pending.

We also have a handheld Stormtracker model that we can use when we are away from the campground. It’s perfect for hiking, riding four-wheelers, boating and many other uses. Both models work off of 12 volt DC, 120 volt AC and dry cell batteries. There is also a back-up power system, furnished by built in rechargeable batteries. The rechargeable, battery is a secondary power source for emergency use when the battery, 12 volt DC power or 120 volts AC are not available. If the power goes out for a long period of time, and all of battery sources have been depleted, both radios have a hand crank that can be used to recharge the batteries and continue to operate the weather radio, flashlight and cell phone charging port. When you get back home, you can use the weather radio receiver in your house.

For more information on the NOAA Weather Radio visit their website at www.nws.noaa.gov/

Happy RV Learning!
Mark Polk
RV Education 101

Monday, December 19, 2011

No more White Knuckle Driving – RSS Sway Bars

If you’ve been around RV’s for awhile you have probably heard of the term “sway,” even if you don’t pull a trailer. It’s a common term in the RV industry and it means a side-to-side movement. Sway is normally associated with a travel trailer being pulled by a tow vehicle, but it can take on a whole new meaning for motorhome owners too.

We currently own a 35’ Class A motorhome on a Ford chassis. The first time I drove this motorhome on the Interstate I experienced sway in a motorhome, when a semi-truck passed us.

Rather than calling it sway, when a truck passes you from the rear, I refer to it as the “push-pull effect.” As the truck is passing the first thing you feel is the air pressure from the truck pushing against the side of the motorhome. Then as the truck starts to go past the motorhome it pulls you back in. This sensation makes the motorhome feel top heavy.

Other terms used for sway, as it pertains to motorhomes, are “body roll” and “pitch.” You will experience these different types of sway whenever pressure is exerted against one side of the motorhome. It can be caused by a gust of wind, or a shift in weight while cornering. The effects of sway on a motorhome are increased because of the height and mass of the motorhome. Regardless of what term you use for it, over time it takes its toll on the driver.

The solution to sway is in the suspension. Chassis manufacturers are aware of this problem, and in an effort to reduce sway they use what is referred to as a sway bar. The sway bar is the link between the suspension system and the vehicles frame. The sway bar uses the weight of the rear axle as a brace against the chassis, so any pressure exerted against either side of the motorhome is countered by the sway bar. The problem with this, in many cases, is the stock sway bar installed by the manufacturer is not strong enough to absorb or counter the effects of sway or pressure exerted against the sides of the motorhome.

Now that we know what the problem is, what can we do to fix it? Once again I will mention that I am no way affiliated with this product, but the solution I found was called the RSS sway bar by Roadmaster Inc. RSS sway bars have thicker diameters than stock manufacturer sway bars. They’re made of 4140 “chromoly” steel which is stronger and more durable than the spring steel used in most stock sway bar applications. The RSS sway bar works by reducing the body roll and balancing the weight transfer during cornering.

Another problem related to stock sway bars are the bushings they use. Sway bars pivot as pressure is constantly being countered by the bar. Most stock sway bars use rubber bushings at these pivot points. Rubber bushings harden and wear over time, causing the motorhome to roll or lean even more, from the same amount of pressure exerted against the side of the motorhome. RSS sway bars use polyurethane bushings. Polyurethane won’t wear like rubber, and it holds up much better at these pivot points.

After installing the RSS the real test was to see how the motorhome handles on the road. I drove the motorhome slightly over 7,000 miles without the RSS sway bar, and after driving it 750 miles with the RSS sway bar all I can say is the difference is like night and day. I wish I had it on the motorhome the first 7,000 miles. The motorhome is more stable on the road, it handles and corners better and the body roll or sway was drastically reduced. If you experience sway when driving your motorhome, and are tired of white knuckle driving experiences the RSS sway bar could be the solution to your problems too.

Happy RV Learning,
Mark Polk
RV Education 101

Monday, October 10, 2011

How to inspect an RV for water damage

I received a question from a concerned RVer the other day that went something like this; “My neighbor just paid an expensive repair bill for water damage on his RV and I would like to know what I can do to prevent this same thing from happening to me?”

One thing is for sure, if there is a way for water to get in your RV it will find it. Water leaks on an RV can cause extensive damage and can be extremely costly to repair. To protect your investment and your wallet you need to take the time to REALLY inspect for water leaks. The outside of your RV may look fine but the internal damage caused by water over a period of time can result in the entire roof, floor or wall rotting away without you even knowing it, until it’s too late. You should inspect your RV for water leaks twice a year at a minimum, and especially prior to storage if it will be stored outside.

Here are a few things to look for during your routine inspections.

* To stop a leak before it starts thoroughly inspect all roof and body seams. Reseal any seams or sealants that show signs of cracking or separation. Consult your RV dealer for sealants compatible with different types of materials.

* Look for any discoloration, and feel for any soft spots on the ceiling around roof vents, air conditioners, TV antennas, plumbing vents, and any other openings that were cut in the roof. Soft spots are an indication that water damage has already started. Find the source of the leak and have it repaired immediately.

* Look for any discoloration or wrinkles in the wallpaper, and feel for any soft spots on the walls around all windows, doors, slide outs, or any other openings that were cut in the side walls.

* Identify the location of items like the water heater, furnace, outside shower, potable water fill and city water inlet on the outside of the RV and then access those areas from the inside of the RV. Look for any indications of water damage around these openings.

* Open all overhead cabinets and look in the top corner where the walls meet the ceiling for any discoloration and feel for any soft spots. This would indicate a leak at the seam where the sidewall and the roof attach.

* Check in all outside storage compartments for any indications of water leaks or water damage.

* Check for any soft spots on the roof itself especially around the roof seams at the front and rear of the RV. Thoroughly inspect all sealants on the roof around every opening.

Caution: Be extremely careful when working on the roof of your RV, a fall can cause serious injuries, or be fatal. Not all roofs are designed to be walked on. It may be necessary to use 2X4 foot sections of 1/2″ plywood to distribute your weight over the roof rafters.

* Some Class C motor homes are notorious for leaks in the cab over bed area. Look for any signs of discoloration and feel for soft spots. Remove the mattress and feel for water.

* If your RV has fiberglass sidewalls look and feel the outside walls for any signs of delamination. Delamination is caused by water getting between the exterior fiberglass and the sidewall. When this happens the exterior fiberglass separates from the sidewall of the RV. You can stand at the front or rear of the RV and look down the side for any noticeable ripples or what looks like a bubble. You can also press on the sidewalls. If you feel the exterior fiberglass move it is delaminating. Many times delamination starts where an opening was cut in the sidewall of the RV. Have any noticeable damage repaired immediately!

The key to preventing water damage on your RV is to perform these inspections on a routine basis and to discover and repair any leaks while in the early stages. If you don’t feel comfortable performing these inspections have an authorized service center do it for you.

Wednesday, October 5, 2011

What you need to know about tow vehicle braking laws

Most U.S. States and Canadian Provinces have their own laws on the requirement for brakes on a towed trailer. The word trailer also applies to a vehicle being towed behind a motorhome. These laws are normally based on the amount of weight being towed. Not only is it illegal to exceed these weight limits without brakes, but your insurance company may not cover you in the event of an accident involving a trailer with no braking system. The most important reason is for your safety and the safety of others.

For a complete list of braking laws for the U.S. and Canada go to http://www.roadmasterinc.com/products/braking/map.html

The brakes on a tow vehicle or motor home are designed by the vehicle manufacturer to stop the weight of that particular vehicle, not the additional weight being towed behind it. This additional weight adds a substantial increase to the distance required to stop safely.

Travel trailers and 5th wheels come equipped with electric brakes and RV dealers educate the RV consumer on the requirements for adding an electronic brake control to the tow vehicle. Some pop-ups are ordered with brakes and some without. Again, this is often times based on the braking laws for the state you live in. My advice is if you’re going to purchase a pop-up get one that has brakes.

The real culprit for disregarding braking laws is a motorhome towing a vehicle behind it. Most people assume that because of the size of the motor home there is no need for a supplemental brake system on the towed vehicle and sometimes RV dealers fail to communicate the requirement for a supplemental braking system.

I for one was guilty of towing a vehicle without a braking system for quite some time. A close call while driving through a major city during rush hour suddenly educated me on how important it is.

ANOTHER THING THAT SURPRISES PEOPLE is how much the vehicle they’re towing actually weighs. Take your towed vehicle to a set of scales and have it weighed. Make sure it has everything in it that will be in it when you are towing it. After you weigh it double check to make sure the receiver on the motorhome is rated to tow that amount of weight and that you aren’t exceeding any of the motor home weight ratings like the Gross Combined Weight Rating (GCWR). The GCWR is the maximum permissible weight of the fully loaded motor home and the fully loaded towed vehicle combined. Most RV chassis manufacturers base their GCWR on the assumption that a supplemental brake system is being used.

Regardless of the brake system that best suits your individual needs the important thing is that you have one. There are many reasons to have a braking system on your towed vehicle.

1) It’s the law
2) It can void your vehicle warranty
3) It can void your insurance
4) It will reduce wear and tear on RV brakes and other components
5) Liability

But, most importantly it SAFELY reduces the stopping distance and helps to protect you, your loved ones and the safety of others.

Thursday, September 29, 2011

Debunking Portable Air Compressors: They're not all up to the job

I think most RVers understand the importance of maintaining proper tire inflation pressure. The problem is if you wait until you’re on the road to check tire pressure the tires are too hot for correct evaluation. Checking the inflation pressure when you stop to refuel doesn’t make sense because you will get higher pressure readings and if you let air out the tires they are under-inflated when they are cold. Another problem is when you are at the campground, and you want to check the tire pressure, there is no available air support to do it.

This is why you might want to consider purchasing a portable air compressor. But, air compressors can be confusing to understand, especially if you are trying to find one that is capable of increasing the inflation pressure in large motorhome tires. Let’s start with some air compressor basics.

Air compressors have 3 main ratings associated with them, horsepower (HP), Cubic Feet per Minute (CFM) and Pounds per Square Inch (PSI). Understanding these 3 functions of an air compressor can help us select the right portable air compressor for the job.

We’ll start with horsepower. Unfortunately when it comes to air compressors manufacturers don’t do a great job of explaining it to the consumer, almost to the point some would consider false advertising. Manufacturers tend to over-inflate HP ratings, assuming if the consumer see’s 6 HP advertised, rather than 2 HP, they are more apt to purchase the higher HP rated compressor. This is true in many situations. If you’re a muscle car enthusiast you would definitely consider the HP rating of a vehicle before buying it, right? But if we take a closer look at horsepower, as it relates to air compressors, we can seek out the truth.

HORSEPOWER
Horsepower was invented by an engineer by the name of James Watt. The same watt you think about when buying a light bulb. Watt is used as a measure of electrical and mechanical power. When we apply watts to HP, one HP is equivalent to 746 watts. So if you buy an air compressor rated at 6 HP and it operates on 120 volts it is, in a sense, a false rating. Here is why. If you plug the compressor into a standard 15 amp, 120 volt circuit it would only produce about 2HP (120 volts X 15 amps = 1800 watts). This is slightly over a 2 horse power rating.

The higher 6 HP rating advertised is commonly referred to as peak HP, similar to a vehicles engine HP rating. The peak HP rating of a vehicle engine is only accurate at a higher RPM range (usually 5000 to 6,000 RPM’s), but rarely do you drive at 5,500 RPM’s. As for the air compressor it would require more amps, from a 240 volt circuit, to produce this peak HP rating.

CUBIC FEET PER MINUTE
The Cubic Feet per Minute (CFM) is an important rating when it comes to portable air compressors. CFM is basically a measurement of the rate a compressor can deliver a volume of air. CFM varies with atmospheric pressure. It also varies with the temperature and humidity of the air. Air compressor manufacturers calculate Standard Cubic Feet per Minute (SCFM) as CFM at sea level with 68 degrees F, at 36% relative humidity.

Note: CFM ratings can be skewed by the manufacturer too. Let me explain

POUNDS PER SQUARE INCH
Let’s talk about our third rating, Pounds per Square Inch (PSI). For air compressors the CFM ratings are given at a specific PSI. In other words an air compressor rated at 3 CFM @ 90 PSI should be capable of delivering the 3 CFM at 90 PSI. The problem is air compressor manufacturers can advertise a higher CFM at a specific pressure because the air compressor is capable of delivering the rated CFM going from 0 to 90 PSI, but what is the true CFM delivered at 90 PSI. If your air tools or RV tires require a specific CFM rating at 90 PSI you more than likely won’t get it based on the advertised CFM @ a specific pressure. What this translates too is that it will take a long time to inflate some larger RV tires, if the compressor is in fact capable of inflating the tires at all.

When shopping for a portable air compressor the key is to try and find one that can deliver about 4 REAL CFM based on the REAL HP rating at 90 to 100 PSI.

If you have the storage room available, and you will have access to electricity, you can find some reliable pancake style portable compressors that will do a good job inflating tires and performing other small household jobs.