By Mark Polk
Over the weekend we started planning for an RV trip we are taking later this summer. It’s about 6,000 miles roundtrip. We are on somewhat of a timeline and I wanted an idea on average of how many miles we would travel each day, based on our schedule.
It seems like more often than not we are on a tight schedule, forcing us to put in more miles per day than I would like. I want this trip to be more leisurely when it comes to how many hours you are behind the wheel each day.
Admittedly I am one of those people who likes to do all of the driving myself. I just feel better if I know I am behind the wheel. I know my wife, Dawn, is a competent driver (she even has her CDL) but I still prefer to do the driving. Don’t get me wrong, I think it is extremely important that both individuals are capable of driving or towing the RV. You never know when your wife or husband will need to drive the RV and they should feel comfortable and confident in doing so.
AS WE WERE PLANNING THE TRIP it brought back a memory of a past trip we took in the RV. We were stopped in traffic because of an accident, and had sat in the same spot without moving for at least 30 minutes. I told Dawn that I was going to run back and use the bathroom and if traffic started moving to just get behind the wheel and drive. The boys were in the back bedroom playing X Box.
The motorhome started moving about the same time that I came out of the bathroom. Both boys looked up at me with their eyes wide open and my older son said, “If you’re back here with us who’s driving the motorhome?” My youngest son (Dawn’s stepson), who was about 8 at the time leaped up and ran to the front of the motorhome and said, “Dawn just pull over as soon as you can and let dad drive.”
The boys never saw Dawn drive the motorhome and just assumed she couldn’t or shouldn’t be driving it. At that point I made a mental note to myself to one day produce a driving DVD to help teach people who don’t drive the RV how to do it. It took a while but eventually we produced our DVD Drive your Motorhome Like a Pro.
Friday, January 29, 2010
Thursday, January 7, 2010
RV generator exercise tips plus carbon monoxide warning
You should start and run an RV's gas generator with at least a half rated load for a minimum of two hours every month. It is extremely important that you run it with this minimum rated load.
Generators are designed to run with a load placed on them. Our motorhome has a 4,000 watt generator so I can either turn the roof air conditioner on in the summer time, which is about 2,000 watts or I can use a couple of small portable electric heaters when the outside temperature is cold. It's always better to let your generator run for longer periods than it is for short periods. Check your generator owner's manual for load ratings specific to your unit.
Other maintenance intervals for generators are based on usage. Your generator set will have an hour meter so you can monitor the usage. Consult your owner's manual for maintenance intervals.
Changing the oil and filters on a regular scheduled basis and for seasonal changes is just as important for your generator as it is for your automobile. For extended storage requirements consult your generator owner's manual.
Carbon Monoxide Poisoning and your generator:
The onboard generator makes your RV fully self-contained. It allows you access to 120-volt power when there is no shore power available, but keep in mind that the carbon monoxide it generates is deadly! Test the carbon monoxide detector every time you use the RV. Know what the symptoms of carbon monoxide poisoning are:
1) Dizziness
2) Vomiting
3) Nausea
4) Muscular twitching
5) Intense headachs
6) Throbbing in the temples
7) Weakness and sleepiness
8) Inability to think coherently
If you or anyone else experiences any of these symptoms get to fresh air immediately. If the symptoms persist seek medical attention. Shut the generator down and do not operate it until it has been inspected and repaired by a professional.
Learn about Mark Polks extensive of helpful DVDs, books and eBooks at RVbookstore.com
Generators are designed to run with a load placed on them. Our motorhome has a 4,000 watt generator so I can either turn the roof air conditioner on in the summer time, which is about 2,000 watts or I can use a couple of small portable electric heaters when the outside temperature is cold. It's always better to let your generator run for longer periods than it is for short periods. Check your generator owner's manual for load ratings specific to your unit.
Other maintenance intervals for generators are based on usage. Your generator set will have an hour meter so you can monitor the usage. Consult your owner's manual for maintenance intervals.
Changing the oil and filters on a regular scheduled basis and for seasonal changes is just as important for your generator as it is for your automobile. For extended storage requirements consult your generator owner's manual.
Carbon Monoxide Poisoning and your generator:
The onboard generator makes your RV fully self-contained. It allows you access to 120-volt power when there is no shore power available, but keep in mind that the carbon monoxide it generates is deadly! Test the carbon monoxide detector every time you use the RV. Know what the symptoms of carbon monoxide poisoning are:
1) Dizziness
2) Vomiting
3) Nausea
4) Muscular twitching
5) Intense headachs
6) Throbbing in the temples
7) Weakness and sleepiness
8) Inability to think coherently
If you or anyone else experiences any of these symptoms get to fresh air immediately. If the symptoms persist seek medical attention. Shut the generator down and do not operate it until it has been inspected and repaired by a professional.
Learn about Mark Polks extensive of helpful DVDs, books and eBooks at RVbookstore.com
Wednesday, December 23, 2009
Product does good job filtering RV drinking water
I have written many times about water filtration, water quality and sanitizing your RV water system. There are plenty of reasons RVers should be concerned about the water they drink. When you travel in your RV and stop at different destinations on a regular basis you don’t know anything about the quality of the water. I have always advocated filtering the water in our RV and I am always on the lookout for the best possible method for filtering water.
In October we attended the RVDA convention/Expo in Las Vegas. Every year vendors bring their wares to the convention and introduce these new products to the RV industry. There are always one or two innovative products that catch my eye. This year it was the Metal Trap Ultra Dual filtration system by Hydropure Technologies.
I had the opportunity to talk to Jerry Rademan, president and scientist/chemist behind the product. Jerry has a true passion for clean drinking water and water purification. He explained to me that the Metal Trap Ultra Dual System is the only filter system commercially available that will eliminate or significantly reduce all contaminants in one single system. He said, “The people at Hydro Pure Technologies are dedicated to our families and to our customers. We think there is no other food source that impacts the health aspect of our lives as clean drinking water! It is our goal to provide the best quality water that is available commercially."
Then Jerry challenged me. He said he would send me a Metal Trap Ultra filter system and let me be the judge. What he didn’t know was that my family had recently moved into a new house where the drinking water has a foul odor and taste. And if anybody would know if the filter system works it would be my wife and my 13 year-old son, who constantly talk about the quality of the water in our home.
Shortly after returning from the convention I received two Metal Trap Ultra Dual water filter systems. I installed the larger 14,000 gallon rated system in the house and the 6,000 gallon rated system for the RV. The installation was simple, especially for the RV. The installation in our house required a quick trip to Lowes for some additional plumbing fittings to tie it into the existing water system.
The thing I really like about the Metal Trap Ultra Dual System is that it works for both well water and city water, so it only makes sense that it would be great for RV applications. It filters out metals like iron, manganese, and copper and it also removes hydrogen sulfide which causes the rotten egg smell found in most well-water sources. It also filters out chlorine, chlorinated organic compounds that can be carcinogenic and it removes residual pharmaceuticals, pesticides and herbicides that can find their way into our city drinking water.
The metal trap Ultra dual system works on chemical oxidation, absorption and ion exchange principals that both remove and trap these metals and other unwanted contaminants. Most other filters work on physically straining the water, which doesn’t remove the contaminants that are dissolved in the water. When the water enters the Metal Trap filter the unwanted contaminants get oxidized and are trapped in the filter body. The activated carbon filters out the foul tasting and potentially harmful chemicals and contaminants. When the water enters the second filter it goes through a one micron sediment filter which filters out viruses, bacteria, fine silt, oxidized metals and un-dissolved calcium particles greater than one micron in size.
The real test came after the system was installed, and it passed with flying colors. No more odors and the water is great tasting too. My wife said that it lived up to Jerry’s claim that water filtered through a Metal Trap Ultra filter system is better than any bottled water and better tasting too.
Learn about Mark Polks extensive of helpful DVDs, books and eBooks at RVbookstore.com
In October we attended the RVDA convention/Expo in Las Vegas. Every year vendors bring their wares to the convention and introduce these new products to the RV industry. There are always one or two innovative products that catch my eye. This year it was the Metal Trap Ultra Dual filtration system by Hydropure Technologies.
I had the opportunity to talk to Jerry Rademan, president and scientist/chemist behind the product. Jerry has a true passion for clean drinking water and water purification. He explained to me that the Metal Trap Ultra Dual System is the only filter system commercially available that will eliminate or significantly reduce all contaminants in one single system. He said, “The people at Hydro Pure Technologies are dedicated to our families and to our customers. We think there is no other food source that impacts the health aspect of our lives as clean drinking water! It is our goal to provide the best quality water that is available commercially."Then Jerry challenged me. He said he would send me a Metal Trap Ultra filter system and let me be the judge. What he didn’t know was that my family had recently moved into a new house where the drinking water has a foul odor and taste. And if anybody would know if the filter system works it would be my wife and my 13 year-old son, who constantly talk about the quality of the water in our home.
Shortly after returning from the convention I received two Metal Trap Ultra Dual water filter systems. I installed the larger 14,000 gallon rated system in the house and the 6,000 gallon rated system for the RV. The installation was simple, especially for the RV. The installation in our house required a quick trip to Lowes for some additional plumbing fittings to tie it into the existing water system.
The thing I really like about the Metal Trap Ultra Dual System is that it works for both well water and city water, so it only makes sense that it would be great for RV applications. It filters out metals like iron, manganese, and copper and it also removes hydrogen sulfide which causes the rotten egg smell found in most well-water sources. It also filters out chlorine, chlorinated organic compounds that can be carcinogenic and it removes residual pharmaceuticals, pesticides and herbicides that can find their way into our city drinking water.
The metal trap Ultra dual system works on chemical oxidation, absorption and ion exchange principals that both remove and trap these metals and other unwanted contaminants. Most other filters work on physically straining the water, which doesn’t remove the contaminants that are dissolved in the water. When the water enters the Metal Trap filter the unwanted contaminants get oxidized and are trapped in the filter body. The activated carbon filters out the foul tasting and potentially harmful chemicals and contaminants. When the water enters the second filter it goes through a one micron sediment filter which filters out viruses, bacteria, fine silt, oxidized metals and un-dissolved calcium particles greater than one micron in size.
The real test came after the system was installed, and it passed with flying colors. No more odors and the water is great tasting too. My wife said that it lived up to Jerry’s claim that water filtered through a Metal Trap Ultra filter system is better than any bottled water and better tasting too.
Learn about Mark Polks extensive of helpful DVDs, books and eBooks at RVbookstore.com
Monday, December 14, 2009
How to estimate propane needed for an RV trip
Have you ever planned an RV trip to a remote area and wondered how long the LP gas in your LP cylinders or LP tank would last? If so, there is a rough way to do it.
First, you'll need to know how much propane is in your RV cylinders or tank when full. Remember an RV propane cylinder or tank is full at 80 percent of its capacity to allow for expansion. Wait until your cylinder or tank is nearly empty and the next time you have it filled ask the attendant how much it holds.
The next step is to multiply your propane container capacity using one of these formulas, (gallons or pounds), to determine the container BTU capacity.
* BTUs per gallon equal 91,502.
* BTUs per pound equal 21,548.
Now, divide your container BTU capacity by the total BTU demand of the LP gas appliances you plan to use. BTU appliance demand can normally be found on the appliance itself, or in the appliance owner’s manual.
This will give you an idea of how long you can expect your LP gas to last.
For example: If your RV propane container holds 14 gallons of LP gas when it’s full, you multiply 14 X 91,502. The result is 1,281,028. Now divide this figure by the total BTU demand of any LP gas appliances you will be using. Let’s say, for the sake of an example, the total BTU demand will be 43,800 BTUs. In this case you would have approximately 29 hours of use before running out of LP gas.
However, keep in mind that the amount of LP gas in the container and varying temperatures will affect these calculations too. This is especially true in cold weather. At temperatures below zero degrees the per hour container BTU capacity will be reduced by 50% or more.
Calculating propane usage can give you a general idea of how long you can use your LP gas fired appliances before needing to find a propane filling station.
Learn about Mark Polks extensive of helpful DVDs, books and eBooks at RVbookstore.com
First, you'll need to know how much propane is in your RV cylinders or tank when full. Remember an RV propane cylinder or tank is full at 80 percent of its capacity to allow for expansion. Wait until your cylinder or tank is nearly empty and the next time you have it filled ask the attendant how much it holds.The next step is to multiply your propane container capacity using one of these formulas, (gallons or pounds), to determine the container BTU capacity.
* BTUs per gallon equal 91,502.
* BTUs per pound equal 21,548.
Now, divide your container BTU capacity by the total BTU demand of the LP gas appliances you plan to use. BTU appliance demand can normally be found on the appliance itself, or in the appliance owner’s manual.
This will give you an idea of how long you can expect your LP gas to last.
For example: If your RV propane container holds 14 gallons of LP gas when it’s full, you multiply 14 X 91,502. The result is 1,281,028. Now divide this figure by the total BTU demand of any LP gas appliances you will be using. Let’s say, for the sake of an example, the total BTU demand will be 43,800 BTUs. In this case you would have approximately 29 hours of use before running out of LP gas.
However, keep in mind that the amount of LP gas in the container and varying temperatures will affect these calculations too. This is especially true in cold weather. At temperatures below zero degrees the per hour container BTU capacity will be reduced by 50% or more.
Calculating propane usage can give you a general idea of how long you can use your LP gas fired appliances before needing to find a propane filling station.
Learn about Mark Polks extensive of helpful DVDs, books and eBooks at RVbookstore.com
Thursday, December 10, 2009
How to prevent water damage to your RV
A RVer wrote me the other day with a question: “My neighbor just paid an expensive repair bill for water damage on his RV and I would like to know what I can do to prevent this same thing from happening to me?”
If there is a way for water to get in your RV it will find it. Water leaks on an RV can cause extensive damage and can be costly to repair. To protect your investment and your wallet you need to take the time to REALLY inspect for water leaks. The outside of your RV may look fine but the internal damage caused by water over a period of time can result in the entire roof, floor or wall rotting away without you even knowing it until it’s too late. You should inspect your RV for water leaks twice a year at a minimum, and especially prior to storage if it will be stored outside.
Here are a few things to look for during your routine inspections.
*To stop a leak before it starts thoroughly inspect all roof and body seams. Reseal any seams or sealants that show signs of cracking or separation. Consult your RV dealer for sealants compatible with different types of materials.
*Look for any discoloration, and feel for any soft spots on the ceiling around roof vents, air conditioners, TV antennas, plumbing vents, and any other openings that were cut in the roof. Soft spots are an indication that water damage has already started. Find the source of the leak and have it repaired immediately.
*Look for any discoloration or wrinkles in the wallpaper, and feel for any soft spots on the walls around all windows, doors, slide outs, or any other openings that were cut in the side walls.
*Identify the location of items like the water heater, furnace, outside shower, potable water fill and city water inlet on the outside of the RV and then access those areas from the inside of the RV. Look for any indications of water damage around these openings.
*Open all overhead cabinets and look in the top corner where the walls meet the ceiling for any discoloration and feel for any soft spots. This would indicate a leak at the seam where the sidewall and the roof attach.
*Check in all outside storage compartments for any indications of water leaks or water damage.
*Check for any soft spots on the roof itself especially around the roof seams at the front and rear of the RV. Thoroughly inspect all sealants on the roof around every opening.
Caution: Be extremely careful when working on the roof of your RV, a fall can cause serious injuries, or be fatal. Not all roofs are designed to be walked on. It may be necessary to use 2X4 foot sections of 1/2″ plywood to distribute your weight over the roof rafters.
*Some Class C motor homes are notorious for leaks in the cab over bed area. Look for any signs of discoloration and feel for soft spots. Remove the mattress and feel for water.
*If your RV has fiberglass sidewalls look and feel the outside walls for any signs of delamination. Delamination is caused by water getting between the exterior fiberglass and the sidewall. When this happens the exterior fiberglass separates from the sidewall of the RV. You can stand at the front or rear of the RV and look down the side for any noticeable ripples or what looks like a bubble. You can also press on the sidewalls. If you feel the exterior fiberglass move it is delaminating. Many times delamination starts where an opening was cut in the sidewall of the RV. Have any noticeable damage repaired immediately!
The key to preventing water damage on your RV is to perform these inspections on a routine basis and to discover and repair any leaks while in the early stages. If you don’t feel comfortable performing these inspections have an authorized service center do it for you.
Learn about Mark Polks extensive of helpful DVDs, books and eBooks at RVbookstore.com
If there is a way for water to get in your RV it will find it. Water leaks on an RV can cause extensive damage and can be costly to repair. To protect your investment and your wallet you need to take the time to REALLY inspect for water leaks. The outside of your RV may look fine but the internal damage caused by water over a period of time can result in the entire roof, floor or wall rotting away without you even knowing it until it’s too late. You should inspect your RV for water leaks twice a year at a minimum, and especially prior to storage if it will be stored outside.
Here are a few things to look for during your routine inspections.
*To stop a leak before it starts thoroughly inspect all roof and body seams. Reseal any seams or sealants that show signs of cracking or separation. Consult your RV dealer for sealants compatible with different types of materials.
*Look for any discoloration, and feel for any soft spots on the ceiling around roof vents, air conditioners, TV antennas, plumbing vents, and any other openings that were cut in the roof. Soft spots are an indication that water damage has already started. Find the source of the leak and have it repaired immediately.
*Look for any discoloration or wrinkles in the wallpaper, and feel for any soft spots on the walls around all windows, doors, slide outs, or any other openings that were cut in the side walls.
*Identify the location of items like the water heater, furnace, outside shower, potable water fill and city water inlet on the outside of the RV and then access those areas from the inside of the RV. Look for any indications of water damage around these openings.
*Open all overhead cabinets and look in the top corner where the walls meet the ceiling for any discoloration and feel for any soft spots. This would indicate a leak at the seam where the sidewall and the roof attach.
*Check in all outside storage compartments for any indications of water leaks or water damage.
*Check for any soft spots on the roof itself especially around the roof seams at the front and rear of the RV. Thoroughly inspect all sealants on the roof around every opening.
Caution: Be extremely careful when working on the roof of your RV, a fall can cause serious injuries, or be fatal. Not all roofs are designed to be walked on. It may be necessary to use 2X4 foot sections of 1/2″ plywood to distribute your weight over the roof rafters.
*Some Class C motor homes are notorious for leaks in the cab over bed area. Look for any signs of discoloration and feel for soft spots. Remove the mattress and feel for water.
*If your RV has fiberglass sidewalls look and feel the outside walls for any signs of delamination. Delamination is caused by water getting between the exterior fiberglass and the sidewall. When this happens the exterior fiberglass separates from the sidewall of the RV. You can stand at the front or rear of the RV and look down the side for any noticeable ripples or what looks like a bubble. You can also press on the sidewalls. If you feel the exterior fiberglass move it is delaminating. Many times delamination starts where an opening was cut in the sidewall of the RV. Have any noticeable damage repaired immediately!
The key to preventing water damage on your RV is to perform these inspections on a routine basis and to discover and repair any leaks while in the early stages. If you don’t feel comfortable performing these inspections have an authorized service center do it for you.
Learn about Mark Polks extensive of helpful DVDs, books and eBooks at RVbookstore.com
Thursday, December 3, 2009
Mark Polk's seven tips for motorhome tire safety
It seems as though I talk about tire safety all of the time. The reason I do is because tires are an important safety topic concerning motorhomes, and are often overlooked.
Just recently I read a newspaper article that summed up just how overlooked tires are, in general. The article stated, “The Rubber Manufacturers Association found that 29 million drivers believe that tires require no regular maintenance.”
Let’s take a look at my top seven tire tips for safer motorhome trips.
1. Two of the biggest problems with motorhomes today are overloading the RV and under inflated tires. With multiple slideout rooms, large holding tank capacities and the ample amount of storage space available on today’s motorhomes it’s easy to see why so many are overloaded. We have a natural tendency to fill every nook and cranny of available storage space on our motorhome.
2. Another problem is out-of-balance loads. You can be within an axle or tire’s load capacity on one end of an axle, and be over capacity on the other axle end. This is a common problem with motorhomes, and many times the cause is poor weight distribution and/or improper loading of the motorhome. When this happens the tire or tires on the end of the axle that is overloaded are subject to tire failure.
The bottom line is overloaded motorhomes and under inflated tires can be extremely dangerous. The only way to make sure your RV is not overloaded is to have it weighed.
3. Weight ratings for motorhomes are established by the manufacturer and are based on the weakest link in the chain. When you exceed a weight rating, you are overloading one or more components on the motorhome and risk wearing out the component prematurely or complete failure of the component. In many cases the tires on your motor coach are the weakest link.
Just like the axles on your motorhome, your tires have load ratings, too. The maximum ratings are molded into the side of the tires. Keep in mind these are maximum ratings. The sidewall of the tire shows the maximum load and the inflation pressure for that load. Never set the inflation pressures below the recommendations you find on the vehicle manufacturer’s placard, and do not exceed the maximum inflation pressure ratings found on the tire’s sidewall.
4. The tires on your motor coach are the most vulnerable component affected by overloading the motorhome. There are numerous reasons for this. First and foremost is when the tires are not inflated properly for the load. Failure to maintain correct tire pressure can result in fast tread wear, uneven wear, poor handling and excessive heat buildup, which can lead to tire failure.
The only way to correctly measure the inflation pressure in your tires is with a quality inflation pressure gauge. Using your boot, a club or a hammer is not accurate, and don’t ever depend on your eyes to check tire inflation. There can be as much as 20 PSI difference between tires that look the same to your eye. Invest in an accurate inflation pressure gauge. Get one with a double, angled foot. This makes it much easier to check the outer tire of a dual set.
5. Check all of your tires on a regular basis and adjust the pressure according to the manufacturer’s recommendation. Never check inflation pressure when the tires are hot, because you will get a higher pressure reading. And if you let out some air, the tires will be under inflated when they are cold.
If you have dual wheels, you’ll want to add extension hoses to the valve stems to make the job of checking tire inflation easier. It can be nearly impossible to check the inner dual without extension hoses. The best extension hoses will have stainless-steel reinforcement and external braiding for long trouble-free life.
6. Ozone in the air and UV rays from the sun shorten the life of your tires. It’s not uncommon to see motorhome tires with low mileage and plenty of tread that are ruined by the damaging effects of ozone and UV rays. Ozone in the air causes tires to dry rot and deteriorate. UV rays from the sun make it happen quicker. This is especially true of the tire’s sidewall. Inspect your tires for damage, such as cracks in the sidewalls. If you notice anything, have the tires inspected by a professional.
Also, keep the tires covered with covers that will block out the sunlight when you’re not using your motorhome. You should also place something like a piece of wood between the ground and the tires. Be sure that whatever you use is larger than the footprint of the tire. No portion of the tire should hang over the edge of the tire block. This can cause internal damage to the tire.
7. Occasionally washing your tires with soap and water is okay, but anything beyond that can actually shorten the life of your tires. Sidewall rubber contains antioxidants and anti-ozones that are designed to work their way to the surface of the rubber to protect it. Washing tires excessively removes these protective compounds and can age tires prematurely. The same is true of most tire dressing designed to make your tires shine.
Tire failure can be extremely dangerous and can cause extensive damage to your motorhome. There are no guarantees, but by practicing good tire maintenance you can feel much safer and secure that the weakest link on your motorhome will do its job while you’re out exploring this wonderful country we live in.
Just recently I read a newspaper article that summed up just how overlooked tires are, in general. The article stated, “The Rubber Manufacturers Association found that 29 million drivers believe that tires require no regular maintenance.”
Let’s take a look at my top seven tire tips for safer motorhome trips.
1. Two of the biggest problems with motorhomes today are overloading the RV and under inflated tires. With multiple slideout rooms, large holding tank capacities and the ample amount of storage space available on today’s motorhomes it’s easy to see why so many are overloaded. We have a natural tendency to fill every nook and cranny of available storage space on our motorhome.
2. Another problem is out-of-balance loads. You can be within an axle or tire’s load capacity on one end of an axle, and be over capacity on the other axle end. This is a common problem with motorhomes, and many times the cause is poor weight distribution and/or improper loading of the motorhome. When this happens the tire or tires on the end of the axle that is overloaded are subject to tire failure.
The bottom line is overloaded motorhomes and under inflated tires can be extremely dangerous. The only way to make sure your RV is not overloaded is to have it weighed.
3. Weight ratings for motorhomes are established by the manufacturer and are based on the weakest link in the chain. When you exceed a weight rating, you are overloading one or more components on the motorhome and risk wearing out the component prematurely or complete failure of the component. In many cases the tires on your motor coach are the weakest link.
Just like the axles on your motorhome, your tires have load ratings, too. The maximum ratings are molded into the side of the tires. Keep in mind these are maximum ratings. The sidewall of the tire shows the maximum load and the inflation pressure for that load. Never set the inflation pressures below the recommendations you find on the vehicle manufacturer’s placard, and do not exceed the maximum inflation pressure ratings found on the tire’s sidewall.
4. The tires on your motor coach are the most vulnerable component affected by overloading the motorhome. There are numerous reasons for this. First and foremost is when the tires are not inflated properly for the load. Failure to maintain correct tire pressure can result in fast tread wear, uneven wear, poor handling and excessive heat buildup, which can lead to tire failure.
The only way to correctly measure the inflation pressure in your tires is with a quality inflation pressure gauge. Using your boot, a club or a hammer is not accurate, and don’t ever depend on your eyes to check tire inflation. There can be as much as 20 PSI difference between tires that look the same to your eye. Invest in an accurate inflation pressure gauge. Get one with a double, angled foot. This makes it much easier to check the outer tire of a dual set.
5. Check all of your tires on a regular basis and adjust the pressure according to the manufacturer’s recommendation. Never check inflation pressure when the tires are hot, because you will get a higher pressure reading. And if you let out some air, the tires will be under inflated when they are cold.
If you have dual wheels, you’ll want to add extension hoses to the valve stems to make the job of checking tire inflation easier. It can be nearly impossible to check the inner dual without extension hoses. The best extension hoses will have stainless-steel reinforcement and external braiding for long trouble-free life.
6. Ozone in the air and UV rays from the sun shorten the life of your tires. It’s not uncommon to see motorhome tires with low mileage and plenty of tread that are ruined by the damaging effects of ozone and UV rays. Ozone in the air causes tires to dry rot and deteriorate. UV rays from the sun make it happen quicker. This is especially true of the tire’s sidewall. Inspect your tires for damage, such as cracks in the sidewalls. If you notice anything, have the tires inspected by a professional.
Also, keep the tires covered with covers that will block out the sunlight when you’re not using your motorhome. You should also place something like a piece of wood between the ground and the tires. Be sure that whatever you use is larger than the footprint of the tire. No portion of the tire should hang over the edge of the tire block. This can cause internal damage to the tire.
7. Occasionally washing your tires with soap and water is okay, but anything beyond that can actually shorten the life of your tires. Sidewall rubber contains antioxidants and anti-ozones that are designed to work their way to the surface of the rubber to protect it. Washing tires excessively removes these protective compounds and can age tires prematurely. The same is true of most tire dressing designed to make your tires shine.
Tire failure can be extremely dangerous and can cause extensive damage to your motorhome. There are no guarantees, but by practicing good tire maintenance you can feel much safer and secure that the weakest link on your motorhome will do its job while you’re out exploring this wonderful country we live in.
Thursday, August 6, 2009
How to keep a mouse out of your (RV) house
I am by no means an expert on pest and rodent control, but after researching the subject I can offer a few ideas that seem to work for other RVers.The first and most important step is to try and prevent mice from being able to access you RV. This can be difficult because they can enter the RV through some very small areas. Start by inspecting the underside of your RV for any gaps or holes. Fill these gaps using silicone or expanding foam. A word of caution, if you never used expanding foam before you should experiment with it on something other than your RV first. When it dries it can expand a great deal more than you expect.
Next, open drawers and cabinet doors inside your RV. Look in all of the corners and crevices, especially where plumbing and wiring enter the RV. If you can see any daylight mice can get in. Again, fill these areas with silicone or foam.
Mice also enter through vents like the furnace. You can purchase wire mesh type covers from your RV dealer that can be installed over these vents. Many RVers suggest you spray some type of insect spray (that contains mint oils) around the tires to discourage mice. The only problem with this is you would need to do it every couple days. I don't recommend any type of poison. It can take several days for the poison to work and the mice will usually die somewhere that you can't find them. If this happens you may never get rid of the smell.
Other RVers recommend using mothballs throughout the RV and in storage compartments, if you don't mind the smell of mothballs. The alternative to mothballs is dryer sheets like Bounce.
Everything you need to know about using your RV you can learn from Mark Polk. Check out his books and DVDs at RVbookstore.com.
Subscribe to:
Posts (Atom)
